RME / LNI-2 DC

This is an active DC filter from RME that provides audio equipment with a stable power supply with ultra-low noise.

Active DC filter/stabilizer
【DC input】
■Input voltage range: 9?18V DC
■Polarity: Center +, outer -
■Connector: 5.5 × 2.1 mm, lockable or standard type
■Idle power consumption: 0.7 W
■Typical power consumption (12V input, 2A load): 31W
■DC output μFilter
■ Output voltage: 12.0V
■ Continuous output current: 2.0A
■ Continuous output power: 24W
■ Maximum output current: 3.0A
■ Noise @0-3A, AES17: <2μV, <1μVA-weighted
■ Noise @0-3A, 100kHz bandwidth: <3μV, <2μVA-weighted
Output impedance including cable: 0.012Ω
Load regulation (0/1/2A): 0.20
Overload protection: >3.0A
Overheat protection: >80°C (176°F)
Low voltage detection: <9.0V
Short circuit current (red LED): <0.1A
■Filter (decoupling) efficiency, 10Hz-1kHz: >110dB
■Filter (decoupling) efficiency, 1kHz-200kHz: >70dB

【General Specifications】
■Dimensions (W x H x D): 80 x 30 x 123mm
■Weight: 605g (1.33lbs)
■Operating temperature: +5°C to +40°C
■Relative humidity: <75%, no condensation