GFI SYSTEM / Solis Ventus

Solis Ventus is a presettable delay and reverb combination. This unit, which is the successor to the long-awaited Specular Tempus, which is no longer in production, is equipped with dual DSP, and can be used not only as a combination of two effects, but also as two independent pedals. It also supports expressions and MIDI control, allowing for a wide range of expandability.

■Main features
-Dual engine specification with independent drive of reverb and delay.
- Two effects can be used at the same time.
・Free combinations such as Reverb + Reverb, Delay + Delay, Delay + Reverb, etc.
・The dry signal remains an analog signal.
・96 presets.
- Supports spillover when switching effects and trail when switching bypass.
-Flexible routing (series, parallel, dual mono).
・Stereo looper (maximum 40 seconds)
・Supports instrument level/line level.
- Controlled by external switch.
・Expression input x2 (CV compatible).
・MIDI Input, MIDI Thru/Clock terminal.
- Highly visible OLED display.

■Specification
・Input impedance: 1 MOhm.
・Output impedance: 500 Ohm.
・Volume trim: +/- 3dB.
・Max input level: +7.23 dBV = 9.45 dBu = 6.5 Vpp.
・SNR: 115 dB typical.
・AD/DA: 24-bit, 40 KHz.
・Bypass: Buffered or True Bypass (selectable).
・Output jacks: 1/4 inch TS.
・Input jacks: 1/4 inch TS.
・MIDI Input / MIDI Thru jacks: 1/4 inch TRS.
・USB connector: Type C

■Product specifications
・Dimensions: 17 x 12 cm (6.7 x 4.6 inch)
・Power supply: 9V DC / 350mA or more center negative (power adapter sold separately)

*Notes regarding power supply
Solis Ventus requires 350mA of current during startup. Some power supplies increase the current slowly, so if you turn on Solis Ventus and the power supply at the same time, Solis Ventus may not start up. If Solis Ventus does not start up even though the power supply meets the requirements, turn on the power supply, wait a moment, and then try starting Solis Ventus.

*Specifications such as product configuration are subject to change without notice depending on product quality improvements and parts supply and demand conditions.