SHURE / SM4KKITJDS

This value-packed set includes the Shure SM4 Kit true condenser microphone and CDA5B desk arm stand. Its interference-free design and mix-ready audio enable professional recording of vocals and instruments.

[SM4 Kit]
■Type: True Condenser
■Frequency Response: 20 Hz to 20 kHz
■Polar Pattern: Cardioid
■Output Impedance: 150 Ω
■Sensitivity (at 1,000 Hz, open circuit voltage): -38 dBV/Pa, 1 Pascal = 94 dB SPL
■Maximum Input Sound Pressure Level (1 kHz at 1% THD): 1000 Ω load: 140 dB SPL / 2500 Ω load: 145 dB SPL
■Polarity: Positive pressure on the diaphragm generates a positive voltage on pin 2 relative to pin 3
■Connector: Pro Audio 3-Pin (XLR), Male
■Weight: 298 g
■Exterior: Die-cast Zinc
■Power Supply ([1] 1 Pa = 94 dB SPL): 48 V DC Phantom Power (5.3 mA)
■Included Items: SM4 microphone, SM4 shock mount, SM4 pop filter, SM4 soft-shell carrying case, 3/8-inch to 5/8-inch adapter screw

[CDA5B]
■Desk Arm
■Tabletop Microphone Stand
■Arm: 30cm + 30cm
■Clamp compatible width: Up to approximately 35mm
■Thread diameter: 3/8 (Shure) inch
■Includes 5/8-inch adapter screw (attached to the microphone holder)
*The combined weight of the microphone, shock mount, and pop filter must not exceed 1kg.