SHURE / SM4KJDS

This value-packed set includes the Shure SM4 true condenser microphone and CDA5B desk arm stand. Its interference-free design and mix-ready audio enable professional recording of vocals and instruments.

[SM4]
■Type: True condenser
■Frequency response: 20 Hz to 20 kHz
■Polar pattern: Cardioid
■Output impedance: 150 Ω
■Sensitivity (at 1,000 Hz, open circuit voltage): -38 dBV/Pa, 1 Pascal = 94 dB SPL
■Maximum input sound pressure level (1 kHz at 1% THD): 1000 Ω load: 140 dB SPL / 2500 Ω load: 145 dB SPL
■Polarity: Positive pressure on the diaphragm generates a positive voltage on pin 2 relative to pin 3
■Connector: Pro audio 3-pin (XLR), male
■Weight: 298 g
■Exterior: Die-cast zinc
■Power supply ([1] 1 Pa = 94 dB SPL): 48 V DC phantom power (5.3 mA)
■Included Items: SM4 microphone, SM4 swivel mount microphone clamp, microphone pouch, 3/8-inch to 5/8-inch adapter screw

[CDA5B]
■Desk Arm
■Tabletop Microphone Stand
■Arm: 30cm + 30cm
■Clamp compatible width: Up to approximately 35mm
■Thread diameter: 3/8 (Shure) inch
■Includes 5/8-inch adapter screw (attached to the microphone holder)
*The combined weight of the microphone, shock mount, and pop filter should not exceed 1kg.