Tsakalis Audioworks / Multi Cab 4

Overdrive dual channel tube preamp

・Overdrive dual channel tube preamp
- Two ECC83 (12AX7) preamp tubes operate at 240V.
・2 independent channels capable of outputting anything from sparkling clean to tight, heavy distortion tones
- Equipped with two gain/volume sections for each channel.
- Independent 4-band EQ for each channel (Bass, Mid, Treble, Presence)
・3 gain stages for each channel selectable with MODE toggle switch
- CAB toggle switch allows selection of 3 cabinet simulations per channel
- Serial effects loop - also available in bypass mode - can be used to loop time-based effects between preamp and cabinet shims, etc.
- Dedicated balanced TRS cabinet simulation output (with ground lift) - also available in bypass mode
Dedicated output for connecting to the front of an amplifier or power amplifier, selectable with a toggle switch
Full MIDI compatibility - 128 user customizable and programmable MIDI presets
- USB port for loading cab sims into 6 slots (3 for each channel) - Choose from the free Tsakalis Audioworks online library of over 70 carefully selected, high quality cab sims
・Multi-function latching or momentary function footswitch
- Built-in input buffer - only valid in bypass mode
・Made in Athens, Greece
- Power supply: DC12V input (center negative), minimum 700mA.

Blending the analog warmth of real tubes with a highly configurable cabinet simulator and flexible output and control options, the MOTHERSHIP Real Tube Preamp stands out as the most capable and flexible front end of any guitar rig available today. Both channels of MOTHERSHIP are identical but highly configurable. With three gain modes for each channel (high, medium, and low) and a toggle switch to select between three speaker simulations of your choice, MOTHERSHIP allows you to easily and intuitively create a plethora of iconic, familiar, and unique tones. Each channel also features two master gain controls and two master volumes, allowing you to instantly recall four different voices by pressing the corresponding footswitch or using MIDI commands.
Capable of being a fully comprehensive plug-and-play device, MOTHERSHIP also features over 70 free custom cabinet simulations to choose from (when connected via USB to Tsakalis' proprietary TAW Editor app), separate dedicated simultaneous outputs for both the cabinet simulator and the selected amp's ""dry"" output, MIDI control for channel and A/B selection, and a serial mono FX loop for added tonal versatility.
　　

MOTHERSHIP is the perfect ""Amp in a box"" pedal, seamlessly blending a beautifully designed real tube front end with a flexible cabinet modeling solution. It also works as a true tube overdrive pedal when plugged into the front of an amp or directly into a power amp as a preamp section to define the tone of your setup. You can also perform these two functions at the same time.