Tsakalis Audioworks / Crown

Silica Clean, which is manufactured using a special manufacturing method by sandwiching high-quality silica gel between breathable fabrics, exhibits maximum humidity control and deodorizing effects. Prevents the top board from cracking due to expansion due to high humidity or shrinkage due to dryness. Also, since it has a structure that covers the sound hole, it can also be used as a countermeasure against mute and howling. It is a useful item that can be used all year round.

When storing an acoustic guitar, cover the sound hole with this product. By inserting the top plate into the gap on the side of this product, the airtightness and humidity control effect will be enhanced.

■Sound hole cover
■Humidity control protector for guitar
■Humidity management goods
■Humidity control
■Deodorizing
■Raw materials: Silicone resin, polyester fabric, silica gel (B type)

■Compatible sound hole diameter: 98mm to less than 105mm
■Compatible top board thickness: Less than 3.5mm *If it hits the end of the fingerboard, please cut this product with scissors etc.
■Accessories: Moisture absorption sensor
■Body dimensions: W120 x H110

A moisture absorption sensor sticker is attached to visualize the moisture absorption level. Check the moisture absorption sensor seal regularly. If it turns dark blue, it is dry, so please spray water on the polyester fabric using a sprayer. The reason for using a mist is that it becomes fine particles and gets inside the fibers. Performance may deteriorate due to dust and dirt, so we recommend replacing it with a new one every year or so.