TOKAI / LS-101BB

The popular signature pedal, Richie Kotzen Signature Model, is back with an updated version of “RK5 Ver.3”! Needless to say, this is a signature model designed to take full advantage of the functions of the Fly Rig 5, which symbolizes the evolution of effect pedals, and perfectly reproduces Richie Kotzen's unique playing style and sound.

■Features
Rotary speaker mode:
Equipped with a rotary speaker effect that allows for advanced sound creation, further deepening Richie Kotzen's sound.

New compressor, fuzz, and tuner:
By adding various effects, you can create a wide range of sounds. The range of sound expands and richer expression is possible. Other additions include a switchable pre/post boost and effects loop to enhance drive and distortion, increase overall volume to punch up fills and solos.

Toggle SansAmp mode on/off:
Achieve instantaneous sound shifts, allowing for rapid tonal changes during a performance.
Perfect for Richie Kotzen's stage performance:
The ultimate effects pedal with everything a professional player needs.

■Changes in RK5 FLY RIG V3
The headphone switch installed on the V2 has been changed to a DRIFT control.
EFFECT LOOP is newly added.
Changed from COMP switch to PRE/POST switch.

■SPEC
Product size: 317(W)×69(D)×31(H)mm
Product weight: 587g
Input terminal: 1/4” TS PHONE
Input impedance: 1MΩ
Specified input level: -10dBm/250mV (INST LEVEL)
Output terminal: 1/4” TS PHONE, XLR (with GROUND CONNECT switch)
Output impedance: 1kΩ (1/4”TS PHONE, INST LEVEL), 600Ω (XLR, MIC LEVEL)
GROUND CONNECT switch: ON/ground connection, OFF/ground cut
BOOST&COMP section: BOOST/maximum +12dB, PRE\POST switch, BOOST LEVEL
OMG section: DRIVE, LEVEL, FUZZ, TONE
SANSAMP section: ON/OFF SWITCH, DRIVE, LOW(120Hz±12dB), MID(500Hz±12dB), HIGH(3.3kHz±12dB), LEVEL
REVERB&DELAY section: REVERB, SIZE switch (ON/LARGE, OFF/SMALL), FOOT switch, TIME (28m~1000msec), DRIFT level, REPEATS (1~), LEVEL
ROTO switch: DELAY/rotary speaker simulator switching (LEVEL, REPEATS, TIME controls are disabled during ROTO)
Tuner: Equipped with chromatic tuner (start by holding down the REVERB/TUNER switch for 2 seconds)
Headphone switch: 1/4” TS PHONE → Headphone OUT switch
Power supply/current consumption: DC9V (φ2.1mm center negative)/200mA (sold separately)
Package size: 37 x 8.9 x 5cm
Total weight (including packaging): 0.907kg
Country of manufacture: America