LichtLaerm Audio / Aesahaettr

This is a clean boost/buffer that is also included in Solaris Pro, and can be used not only as a clean boost but also as a treble/bass booster. It boosts the start of your guitar sound, and when pushed hard with other pedals, you'll get a nice, soft clip. By placing it in the middle of your signal chain, you can locally boost the gain and tone of vintage pedals and other pedals that are a little dull and quiet, giving them some life.

■First stage of signal chain:
Distortion/overdrive pedal allows you to push the distortion and emphasize pre-set frequencies.

■Middle of the signal chain:
It locally boosts the gain and tone of pedals that are a little dull and quiet, such as vintage pedals, and breathes life into them.

■Late stage of signal chain:
It can increase the volume of your pedal chain, lifting the overall sound when soloing, increasing the presence of lead tones and intensifying your tone.

■Guitar effector
■Booster/Buffer
■Control
・Volume: Adjusts the output of the pedal from zero (can be used as a kill switch), with unity gain in the middle. Functions as gain correction for tone control
・Tone: The middle part of the tone control is virtually flat, and this setting is used when you want to increase the volume straight up. There is a sweet spot on both sides, allowing you to darken the tone or add a little shine.
・Turn fully counterclockwise: Bass boost
・Turn fully clockwise: Treble Boost
*The volume control is used as a gain correction control because bass boost requires lowering the overall gain and treble boost usually requires increasing the overall gain.
■DC9V, center negative
■No built-in DC9V battery function
■Size (LxWxD): 119x64x40mm (including lid)
All pedals are handmade, hand wired, boutique custom guitar and bass pedal effects, manufactured in the UK using only the highest quality components.