SE ELECTRONICS / T2 Matched Pair

Versatile condenser microphone known for drums, percussion, guitar and piano, faithfully reproducing percussive detail and articulation; also recommended for vocals and voice-over.

■A Titanium Capsule That Sets Them Apart
T2 combines dependable performance with versatility.
Based on sE4400's chassis and features, it inherits sE Titan's special capsule, balancing mids and lows with detailed yet restrained titanium-capsule highs.
Suitable for drums, percussion, overheads, hi-hats, orchestras, piano, acoustic guitar, electric and bass guitar cabinets, vocals, strings, woodwinds and brass.
Four selectable patterns: cardioid, hypercardioid, figure-8 and omnidirectional; also includes 40/80 Hz low-cut filters and -10/-20 dB pads.

■Handcrafted 1-inch Titanium True Condenser Capsule
T2's titanium-sputtered capsule provides fast transient response, particularly useful for drums, percussion and other attack-rich instruments requiring clarity and accuracy.
The special diaphragm is also rigid enough to handle high-SPL sources such as loud percussion.

■Rugged Design
Metal switches select cardioid, omnidirectional, figure-8 or hypercardioid patterns. The titanium-sputtered dual-diaphragm capsule enables precise stage or studio miking and pattern-dependent bleed control.

■Rugged Housing and Premium Finish
T2's die-cast all-metal housing, metal switches and rugged spring-steel mesh grille are built for demanding studio use and daily touring.
The flat body and custom suspension allow versatile placement, including very close to drumheads or guitar cabinets.

■Pre-attenuation pads and low-cut filters
Two attenuation pads support loud sources; two low-cut filters reduce excessive low-frequency bleed and proximity effect for easier close miking.

■Factory-matched stereo pair
T2 is also available as a matched stereo pair, with matched capsules for accurate stereo imaging.
The matched-pair model includes a stereo mounting bar, two custom shock mounts and a metal case.

Package Contents
■T2x2 Microphones
・ shock mount + thread adapter 2 sets
・ stereo mounting bar
・ - Metal Case

【 product specifications 】
・ - Capsule Type: Condenser
・ - Diaphragm: Titanium-Coated Mylar
・ - Polar pattern: Cardioid, Hypercardioid, Omnidirectional, Figure-8
・ - Frequency Response: 20 Hz to 20 kHz
・ - Impedance: 22 Ω
・ - Sensitivity: 25 mV/Pa (-32 dB)
・ - Maximum Allowable Sound Pressure Level (SPL): 137 / 147 / 157 dB (0 / -10 / -20 dB Pad, 0.5% THD)
・ - Signal-to-Noise Ratio: 81 dB
・ - Equivalent Noise Level: 13 dB (A)
・ - Pass Filter Switch: 40 Hz / 80 Hz, 6 dB / Octave (switchable)
・ - Pad: -10 dB / -20 dB (switchable)
・ Connector: XLR 3-pin
・ Power Supply: 48V phantom power
・ Dimensions: 146 mm x 58 mm x 29 mm
・ Weight: 290 g

Specifications are subject to change without notice.