NOBUNAGA LABS / VOYAGER　NLA-VYR

NOBUNAGA Labs AdvanceVOYAGER (Voyager) is an OFC tin-plated re-cable that uses proprietary technology to achieve dense mid-low range and excellent separation ability.

■OFC tin-plated wire for deep and rich sound
・By using 133 ultra-fine high-purity oxygen-free copper wires with a diameter of 0.06 mm per core, conductor resistance is suppressed and electrical conductivity is improved. Achieves a natural and dynamic mid-low range. Furthermore, the tin plating process gives the sound a rich resonance and thickness, creating a vivid and extended high range and a rich, deep sound with excellent response. By making the conductor a perfect circle, the flexibility and durability of the conductor itself are dramatically improved. It plays a role in stable signal transmission even when exposed to bending and rapid temperature changes.

■Uses proprietary technology Symmetric Braid Matrix
・The symmetrical braid matrix makes the twisting direction of the positive and negative sides of the conductor symmetrical, making the flow of electrical signals as smooth as possible, suppressing the increase in electrical resistance between the conductors, and widening the frequency range from low to high frequencies. enables the transmission of sound.

■Knitted configuration that minimizes audio signal deterioration
・In order to improve left and right separation and suppress crosstalk, a 4-core woven configuration with a separate ground section is used. Even when connected unbalanced, it enables clear localization and spatial expression, as well as low-frequency reproduction with suppressed distortion.

■ Eliminate transmission loss to the utmost
・In order to equalize the weaving pitch of the cable without applying soldering process (joint processing) at the branch part that causes electrical resistance, each cable is woven by hand one by one, resulting in an ideal design that does not change the transmission characteristics. . It fully demonstrates the original characteristics of the cable.

■High quality Japanese plug
・The plug part uses high quality Japanese-made material with 24K gold plating to achieve a stable connection environment and efficient conductivity. Furthermore, by applying special treatment after flash plating, problems such as plating peeling and oxidation erosion can be prevented for a long time. The shell part uses NOBUNAGA Labs' original matte black design, emphasizing a simple yet luxurious feel.

■Carefully selected custom IEM 2pin connector
・The connector part is plated with 24K gold to reduce contact resistance and exhibit high electrical conductivity. Furthermore, the inside of the shell is molded to minimize trouble when putting on and taking off. The shell part uses NOBUNAGA Labs' original slit design. Black and red lines are printed on the grooves so that they will not fade even after long-term use. (L side is black, R side is red)

■WBT lead-free silver solder
・Uses WBT lead-free silver solder that brings out high decomposition power. High response and crispness, accurately depicting the contours of the sound and realistically expressing even the finest sounds.

■Branch parts with a solid feel
-The Y branch part and cable slider are treated with black aluminum alumite to emphasize a simple yet luxurious feel. A cable slider is used to ensure secure attachment even when used on the move.

■Proprietary cryo treatment that lasts for a long time
・Proprietary cryo treatment at -156℃/72 hours removes distortions in molecular arrangement, suppresses electrical resistance, reduces noise and distortion, provides clear and three-dimensional spatial expression, and has an excellent S/N ratio. This enables information-rich sound.

■Cable: OFC 4-core, tin plated
■Cable length: 120cm
■Earhook: No wire
■Cable slider: With slider
■Plug: 3.5mm 3-pole straight plug
■Earphone side plug: Custom IEM2 pin (0.78mm)
■Impedance: 0.09Ω or less
■Cryo treatment: -156℃/72 hours
■Solder: WBT lead-free silver solder used