Y.O.Sギター工房 / Smoggy Humbucker Bridge Nickel Cover

By creating an intentional gap between the outputs of the two coils, you get a power feel typical of humbucking, a sweeter sound at the neck position, and a wider range of overtones at the bridge position. When tap wiring is used, the output is about 2/3 that of the series, and outputs authentic single coil sound. It has a slightly higher output design than vintage PUs, so it is perfect for single-coil PUs in SSH and HSH layout guitars.

■Humbucker
■For bridge
■Gold cover
■MAGNET: Alnico 2 Bar
■D.C.RESISTANCE: 10.5k ohm (*operates at about 2/3 when tapped)
■4 cores
■Screws and springs included
*The pickup pole piece pitch is 10.0mm. F space pitch pickup is not available. Please note that it is not suitable as a PU for bridges with 11.3mm pitch bridges such as Floyd Rose and vintage type 6-point synchronized tremolo bridges (there is no problem using it with 10.8mm pitch bridges such as GOTOH 510T and Wilkinson VS100N).