DPA / 2028-B-B01

The 2028 Vocal Microphone is a mic created for the specific challenges of the live stage.

This one mic allows you to capture true sound and produce an unforgettable show. Effortlessly. The 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal condenser mic, which provides fantastic, transparent vocals to performers from a wide range of markets including live, HoW, broadcast, etc. Use it wired or together with your favorite wireless system, either way, just plug it in and hear the vocals shine like never before.

[Durable mechanical construction]
The 2028 is an extremely durable microphone. The grille is made of a black chrome finish, which is hard and rugged. In addition, it can be removed for ease of cleaning. The wired version of the 2028 has a handle made of zinc alloy with the same black chrome finish. Overall, the microphone is made with premium materials that can take a beating and will provide years of reliable use.

[Reduces feedback issues]
Unlike other supercardioid mics, the 2028 delivers strong attenuatioxn from the rear- so that the monitors don’t cause any feedback issues. In addition to the fantastic performance at 180°, the mic also offers no pickup at the critical 140-150°, where there are most often stage monitors that can cause feedback in lesser mics.

[Uniform supercardioid directionality]
The 2028 has a supercardioid capsule with DPA’s famously flat off-axis response. Besides a high gain-before-feedback, this characteristic makes it easier for sound engineers to handle bleed from other instruments at close proximity. The 2028 picks up off-axis sounds in a very natural and attenuated way.

[Extreme SPL handling]
The 2028 has a dynamic range of 117 dB so the mic easily picks up the peaks – due to the fast transient response of the diaphragm. This makes it easier to place the mic in the mix. In fact, the 2028 can handle the extreme SPL of the most dynamic singer, but with its low self-noise, it also sounds great in the hands of softer singers as well.

[Easy to EQ]
On a live stage, the 2028 will deliver the same open and transparent sound that other DPA microphones deliver. In fact, it needs no (or very little) EQ to sound just like you are standing next to the singer listening to their performance. This allows the singer to use their voice just as if no mic was present, which puts less strain on them. In addition, it allows sound engineers to spend their time shaping the sound experience rather than covering up due to artifacts. This amazing transparency is unique for all DPA vocal condenser mics. Wired or wireless.

[Specifications]
Directional patternSupercardioid
Principle of operationPressure gradient
Cartridge typePre-polarized condenser
Frequency response20 Hz - 20 kHz
Effective frequency range ±2 dB, at 12 cm (4.7 in)100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz5 mV/Pa; -46 dB re. 1 V/Pa
5 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
Equivalent noise level, A-weightedTyp. 22 dB(A) re. 20 µPa (max. 23 dB(A))
Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
Dynamic rangeTyp. 117 dB
Max. SPL, THD 10%160 dB SPL peak
Rated output impedance150 Ω
Minimum load impedance1 kΩ
Cable drive capability100 m (328 ft)
Output balance principleImpedance balancing with Active Drive
Common mode rejection ratio (CMRR)> 50 dB at 1 kHz
Power supply (for full performance)P48 (Phantom Power)
Current consumptionMax 2.5 mA
ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
ColorMatte black
Weight286 g (10.1 oz)
Microphone diameter48 mm (1.9 in)
Capsule diameter19 mm (0.75 in)
Microphone length188 mm (7.4 in)
Maximum output voltage, RMS9 Vrms; 19 dBV; 28 dBu
Polarity+V at pin 2 for positive sound pressure
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90 %