LAUTEN AUDIO / TOM MIC

Equipped with our newly designed Super-cardioid capsule and dual-bias circuitry, Tom Mic captures pure, high-definition rack and floor tom sonics with maximum impact and tone while minimizing cymbal bleed.

[FOCUSED DESIGN]
A: Super-cardioid large diaphragm condenser capsule focuses on the source, the drum.
B: Circuit designed for high-dynamic range and an output level that melds well with preamps.
C: Body designed to allow proper airflow but also reduce frequencies captured by the rear node.

[BUILT FOR THE JOB]
Each Tom Mic has a solid brass headframe and mildew-resistant dust filter to protect against stick hits, dust, and debris.

[28 dB OFF-AXIS REJECTION]
Our bleed-blocking head design and dual-bias circuitry work together to provide Tom Mic with up to 28dB of off-axis rejection. This means crisp, clear tom sounds with far less cymbal bleed than a traditional dynamic or condenser microphone.

[ONBOARD SOUND SHAPING]
Tom Mic’s filters impact the overall performance of the microphone and play a critical role in its sonic versatility.

[Specifications]
Type: Side-address pressure gradient FET condenser 
Capsule: 32mm
Polar Patterns: Super-Cardioid 
Freq. Response: 20Hz-20KHz 
Dynamic Range: 135dB minimum
SPL Handling: >135DB (0.5%THD@1000Hz)
Impedance: >150 ohms
Self-noise level: < 15dB-A
Signal-to-Noise Ratio: 79dB
Sensitivity: -58.0dBV/Pa (0dB=1V/Pa 1KHz)
Connector: 3-pin XLR
Power: Requires 48v Phantom Power
Dimensions: 127 x 60mm (mic only) 131 x 106mm (with mount)
Weight: 348g (mic only) 450g (with mount)