FULLTONE / CS-SUPA-WAH

The Fulltone Custom Shop SUPA-WAH is a multi-function wah pedal that further evolves the legendary CLYDE wah concept, adding two additional modes and allowing you to switch between a total of five unique voices.

■Controls
・INPUT LEVEL: Adjusts the signal level going into the wah circuit. Turning it clockwise increases the signal going into the pedal, overdriving the wah circuit. Turning it counterclockwise reduces distortion from high output pickups or gives you a clean sound.
・ROTARY MODE SWITCH: Changes the rotary mode.
・BUFFER/BOOSTER: Adjusts the ON/OFF and amount of the JFET buffer/booster. It can also be used as a volume booster, and by increasing the amount, you can distort your amp.
・ON/OFF Footswitch: Located at the front of the pedal. To turn the effect ON, step forward on the pedal and put your weight on it until you hear a "click". The LED will light up red, indicating that the pedal is ON. Repeat the same operation when turning the pedal off. When the pedal is OFF, all of the pedal's functions (including the buffer) are disabled. True bypass switching is used to minimize signal degradation when the pedal is OFF.

■INPUT: 1/4” standard mono phone input jack

■OUTPUT: 1/4” standard mono phone output jack

■DC INPUT: Operates on a high-quality, stabilized 9 to 18VDC center negative power supply with a 2.1mm x 5.5mm plug.

■BATTERY: Can also be powered by a 9 volt battery (006P battery).