FULLTONE / HI-MU

The Fulltone Custom Shop Hi-Mu takes sustain, touch sensitivity and articulation to new heights. Built with full-size components, matched JFETs and hand-soldered craftsmanship, with no op-amps, diodes or digital circuitry.

■Controls
・LEVEL: Adjusts the volume.
・SUSTAIN: Adjusts the amount of distortion.
・BASS Switch: Used in conjunction with the EQ knob to emphasize or reduce the low frequencies. Turning the EQ knob clockwise to 12 o'clock makes the effect of this switch less noticeable.
・EQ: Rather than the traditional Hi-Cut, you can change the tone from rich and smooth (around 9 o'clock) to sharp and cutting (around 3 o'clock).
・ON/OFF Footswitch: Switches on/off.

■INPUT: 1/4" mono standard phone input terminal
■OUTPUT: 1/4" mono standard phone output terminal
■DC INPUT: Operates with a high-quality, stabilized 9V to 18VDC center negative power supply with a 2.1mm x 5.5mm plug.
■BATTERY: Can also be powered by a 9 volt battery (006P battery). To replace the battery, unscrew the screws on the left and right sides of the casing, separate the top and bottom of the pedal, and then replace the battery.