D'Angelico / Deluxe Brighton Vintage Sunburst

The Deluxe Brighton Vintage Sunburst is a 13.25" (336.55mm) wide double cutaway shape with two humbucker pickups with escutcheon.

The original shape of the pickguard, which is typical of Di Angelico, is 5-ply with a design reminiscent of part of an f-hole.
The binding on the body top (7-ply), headstock and neck (3-ply), combined with the mother-of-pearl/avalon split block position markers, gives a chic and gorgeous impression.
The body is flame maple top and swamp ash back with wood materials such as maple and walnut 3-piece neck and ebony fingerboard.
The 24.75" (628.65mm) scale is used, and the 3-piece neck is made of maple with walnut between the maple to resist warping and twisting.
The neck joint is a unique heel-less design that allows the neck to reach the back of the body (where it covers the entire front pickup) like a through-neck, thus providing a wider gluing area, and a "set-through" neck joint that combines playability and strength at high frets. This allows for a wider gluing area, which provides both playability and strength at high frets.
It also features a dual-action truss rod, which is adjusted on the head side.
The distinctive headstock design continues the D'Angelico tradition.
The truss rod cover is made of aluminum, and its design has a sense of presence inspired by the skyscrapers of New York City with its Art Deco architecture (such as the Empire State Building), which was popular in New York City around 1930.
Two metal-covered USA Seymour Duncan Seth Lover A4 humbuckers are mounted on the pickups.
The controls are a 2-volume, 2-tone, 3-way pickup selector layout, with the tone of each pickup also serving as a push-pull switch for the coil split, for a total of 8 different coil combinations.
The hardware is all nickel, with Grover Super Rotomatic locking machine heads for tuning stability, and a tune-o-matic & stop bar tailpiece.
The color is Vintage Sunburst.
A hard case is included.

Headstock Shape: Standard
Logo Inlay: Mother of Pearl D'Angelico New York Logo
Series Inlay (Front): Mother of Pearl Deluxe Shield Logo
Serial Number (Back): Model Name, Serial Number
Binding: 3-ply
Finish: Gloss
Headpin: Cupola
Tuners: GroverR Super Rotomatic Locking
Strings: .010-.046
Truss Rod Cover: Aluminum Skyscraper
Nut Width: 1 11/16" (42.8625mm)
Nut Material: Tusq

Material: Ebony
Binding: 3-ply
Fretwire: Jescar 47/104 Nickel Silver
Scale L ength: 24.75" (628.65mm)
Radius: 14" (355.6mm)