ALLPARTS / LT-1812-000

Fret processing tool from ALLPARTS. Radii are set to fit the five most common fingerboard radii. Made of aluminum, it can be attached to a workbench using the two included screws.

How to bend:

1. Roller position: Set to the position of the two rollers under the large black wheel. (Initial position when you purchase the product)

2. You can adjust by turning the upper wheel.

How to stretch: Use the included hex wrench to remove the right roller and attach it to the screw hole on the upper left. You can adjust by turning the wheel.

■Fret bender
■Radius processing
・7.25 inches
・9.5 inches
・12 inches
・14 inches
・16 inches
■Made of aluminum
■Accessories: Mounting screws, 4mm hex wrench