KENTON / D-SYNC

KENTON Electronics D-SYNC (D-SYNC) is a sync converter that converts MIDI Clock/Start/Stop signals to DIN SYNC (SYNC24), the tempo synchronization standard before the advent of MIDI, and vice versa. Sync converter that can convert DIN SYNC to MIDI Clock/Start/Stop and vice versa.

KENTON Electronics D-SYNC (D-SYNC) is a sync converter that converts MIDI Clock/Start/Stop signals to DIN SYNC (SYNC24), the tempo synchronization standard before the advent of MIDI, and vice versa. Sync converter that can convert DIN SYNC to MIDI Clock/Start/Stop and vice versa.

It is possible to use a DAW or hardware drum machine or sequencer as a master and synchronize it with a vintage drum machine equipped with DIN SYNC IN (SYNC24). Conversely, a vintage drum machine or sequencer with a DIN SYNC OUT (SYNC 24) can be used as a master and synchronized to a DAW or hardware drum machine or sequencer.

If you want to sync multiple DIN SYNC devices with a MIDI device as master, use SYNC-5 (sold separately). SYNC-5 (sold separately).

Features
Mutual conversion between MIDI Clock/Start/Stop and DIN SYNC
DIN SYNC uses all five pins of the cable, so if you use an inexpensive MIDI cable with some of the pins not connected, it may not work properly.

The USB terminal on the back of the main unit is used to supply power; there is no USB interface function.

Product Specifications
MIDI Clock/Start/Stop to DIN SYNC (SYNC24) Sync Converter
Connection Terminals
Power input : 5V 1A USB Mini-B type (can be powered by included USB AC adapter, PC USB terminal, or self-powered USB hub)
MIDI terminals: 1 x MIDI IN, 1 x MIDI OUT, 1 x DIN SYNC IN, 1 x DIN SYNC OUT (5-pin connector)

Dimensions
Width : 110mm
Depth : 55mm
Height : 35mm
(including knobs, rubber feet, and protrusions)
Weight 250g
(excluding AC adapter)
Accessories Japanese manual, AC adapter, USB cable