Recovery Effects / ENDLESS SUMMER PEDAL

Recovery Effects ENDLESS SUMMER PEDAL is a true, fully analog spring reverb in the style of a standard effect pedal. It has a boost function, so you can create anything from a standard spring reverb to a grittier sound, or even a fuzzy, psychedelic tone. A cool and unique reverb pedal.

With BALANCE turned counterclockwise to the minimum, you get a slightly buffered splash reverb. At around 9 o'clock, the amp is boosted, and at 12 o'clock, something goes wrong.

BRIGHTNESS adjusts the tone and depth.

●Controls
・BALANCE: Adjusts the reverb and boost levels.
・BRIGHTNESS: Adjusts the reverb shape.

For a standard reverb sound, set BRIGHTNESS high and BALANCE low.

Turning BRIGHTNESS down will create a damped reverb. The two knobs are in the gain stage, and lowering BRIGHTNESS also affects BALANCE.

The ENDLESS SUMMER PEDAL is powered by a standard center negative DC9V adapter. Batteries cannot be used. Current consumption is 20mA.

●Precautions for use
Due to the unbalanced nature of spring reverb tanks, they may react to noise or radio waves depending on the situation. This is because the spring inside the tank may act as an antenna. To avoid noise as much as possible, please note the following.

- Use high-quality, short cables whenever possible.
- Be careful of electromagnetic interference from speakers, monitors, radio towers, etc. (Usually you can counteract interference by using a high-quality power source.)