JBL / HARPASET10

JBL / HARPASET10 ※画像はXTi 1002となります。

This is a special set that includes the 2-way 15-inch passive speaker PRX415M from the PRX series, which boasts high specs while maintaining a reasonable price, and the CROWN (AMCRON)/XTi2002, a high-quality sound and ultra-lightweight power amplifier equipped with the latest DSP.

■HARMAN PA set
■PA speakers: PRX415M pair
■Power amplifier: XTi2002

This is a 2-way 15-inch passive speaker from the PRX series that boasts high specs while maintaining a reasonable price. The allowable input is a generous 600W (8Ω) and a maximum SPL of 128dB. The durable DuraFlex-coated enclosure and 16-gauge steel grille not only provide superior sound quality but also stand up to harsh environments. Recommended for a variety of uses such as bands and DJ events.

■Type: 2WAY full range
■Frequency characteristics: (-10 dB): 55 Hz - 19 kHz, (±3 dB): 66 Hz - 16 kHz
■Allowable input: 600W (PGM)
■Impedance: 8ohms
■Output sound pressure level: 122 dB SPL continuous
■Maximum output sound pressure level: 128 dB SPL peak
■Woofer unit: JBL M115-8A
■Driver: JBL 2414H-C
■Connector: Speaker/phone combo jack x2
■Stand mount:○(35mm)
■Flying:
■Crossover frequency: 2.2 kHz
■Nominal directivity angle: 90°H x 50°V
■Sensitivity: 98 dB SPL (1w@1m)
■Size: H650 mm x W429 mm x D457 mm
■Weight: 21.0 kg
■Remarks:
■Nominal directivity angle: 90°H x 50°V
■Sensitivity: 98 dB SPL (1w@1m)

CROWN (AMCRON)/XTi2002 is a power amplifier that is equipped with high-performance DSP and has high output performance that can drive large speakers with ease. You can make various settings such as crossover, equalizer, delay, limiter, etc. on the LCD display. If you use the dedicated software Band Manager 2, you can also make more advanced settings on your PC.

■Type: 2 channels
■Stereo output (2ohms): 1,000W+1,000W
■Stereo output (4ohms): 800W+800W
■Stereo output (8ohms): 450W+450W
■Bridge output (4ohms): 2,000W
■Bridge output (8ohms): 1,600W
■Frequency characteristics:-
■Damping factor: 500 or more (10Hz to 1kHz)
■Input terminal: XLR
■Output terminal: Neutik 4P speed controller (NL4MP), binding post
■Power consumption: 650W (1/8 output, pink noise, 2Ω)
■Dimensions: 483 x 89 x 311mm (from the mount surface)
■Weight: 8.4kg
■Others:
■Output performance that exceeds its class
- Equipped with a Peak X Plus limiter that allows detailed settings of threshold, attack, and release to maximize output performance.
-Equipped with a highly efficient switching power supply that generates little heat.
■ Equipped with DSP that can perform various audio processing
Delay
Equalizer
Crossover
Limiter (Peak X Plus)
Subharmonic synthesizer
Monitoring power supply circuit temperature and AC power supply voltage
Signal generator
Save preset
■Dedicated software Band Manager 2 with advanced settings
Detailed DSP settings and presets can be saved using the Band Manager 2 software on a USB-connected PC.
■Flexible input/output section
Input signals can be routed inside the main unit.
Also equipped with a link terminal to branch the input signal.
Two types of output terminals are available: binding post and speed controller.
■Easy to operate front panel and air cooling fan
The front panel is equipped with a large, easy-to-read backlit LCD display.
Equipped with a lock function that prohibits operation.
Equipped with an air cooling fan whose rotation speed can be selected from 3 levels
■Preset data available for JBL PROFESSIONAL speakers
JBL PROFESSIONAL JRX100/PRX400/STX800 */VRX900 (XTi6002 only)