Walrus Audio / CANVRE

Canvas Re-Amp is a passive studio tool designed to reamp guitar, drum, vocal, and other tracks recorded in sessions with pedals, effects, or a combination of different amplifiers.

1. The audio track signal is sent from your DAW to Canvas Re Amp via an XLR or 1/4 inch (plug jack).
2. Output via ReAmp to an amp simulator or microphone-recorded guitar amp.
3.The signal goes back to the DAW via the pedal amp.

・SIZE: 7.8cm(W)× 4.1(H)×12.4(D)cm
・WEIGHT: 256g

●FEATURE
Frequency characteristics: 20Hz - 20kHz
THD+N: 0.07% @ 20Hz / +4dBu input
0.001% @ 1kHz / +4dBu input
Maximum input level: +21dBu @ 20Hz
Noise floor: 116dBu
Signal-to-noise ratio (SNR): 114dB @ 1kHz
Input: Balanced line level
Input impedance: 3k Ohms
Output: unbalanced instrumental level
Output impedance: 2.5k Ohms
Common Mode Rejection Ratio (CMRR): 79dB @ 20Hz / +4dBu Input
Power Requirements: None - Passive
Audio circuit: isolation transformer