One Control / DC PORTER PLEXI 6 DC PACK

DC PORTER PLEXI is a power supply designed specifically for mobile batteries. The simplest design, with a plastic cover called Plexiglas and all components on a PCB, makes it an ultra-light and affordable power supply weighing just 50g.

The DC PORTER PLEXI connects power from a mobile battery to the USB-C port; all DC outs are centre-minus DC 9V and there are 12 ports. There is plenty of room for large pedalboards.
The maximum current capacity that can be output depends on the mobile battery connected, but can be up to 1000 mA total; there is no current limit for each DC9V out.

It also features current usage indicators: 300 mA, 600 mA, 900 mA and 1000 mA (overload) indicators light up; below 300 mA, only the blue LED on each DC9V out is illuminated; above 300 mA, one; above 600 mA, two, Three indicators light up when over 900 mA is exceeded.
Normally, if the over 900 mA indicator lights up, no further power should be supplied.
If the red LED overload indicator lights up, disconnect the mobile battery and disconnect all connections.

● Accessories.
-6 DC PACK
DC cable 15 cm LS x 1
DC cable 30 cm LS x 2
DC cable 50 cm LS x 2
DC cable 70 cm LS x 1

Specifications
DC PORTER PLEXI main unit
　Terminals: DC 9 V out x 12, USB-C x 1
Current capacity: 1000mA max.
　Size: 95 mm x 30 mm x 19.3 mm
　Weight: 50g

The actual current capacity that can be supplied depends on the remaining battery capacity of the connected adaptor or battery. There is no limit to the maximum current capacity for each output terminal.