CUSTOM AUDIO JAPAN / PB10.8DC9-2.5R

This is a power supply designed specifically for sound systems, which uses a special filter circuit designed to suit the usage environment of effects units, loop controllers, etc., to minimize the noise that is typical of switching power supplies.

While maintaining the high power of DC9V/1.2A, the volume has been reduced to about 70% of the previous model. It contributes to saving space on the effect board and allows you to make better use of limited placement space.

* May not be suitable for some vintage type effectors that use germanium transistors, etc.

Outer diameter 5.5mm / center pin 2.5mm
Polarity: center positive
Input voltage: 100 - 240VAC
Frequency: 50 - 60Hz
Output voltage: 9.0VDC ±5%
Maximum current: 1.2A
Power: 10.8W
Overvoltage protection circuit (OVP): 14V max
Short circuit protection circuit (SCP): Automatic recovery type

* If the output terminal is shorted (short circuit) or an overcurrent occurs, the output circuit will automatically stop.
The output circuit will return to normal when the problem is resolved. Overcurrent protection circuit (OCP): 2.5A max
Cable length: 1.5m ±2%
Size: 47.9mm (H/including power plug: 65.4mm) x 33.8mm (W) x 25.4mm (D) ±1%
Weight: 66g