LABGRUPPEN / IPX1200

LABGRUPPEN stereo power amplifier. 1200W, equipped with DSP.

■1200W 1U 2-channel DSP-equipped power amplifier

Product overview
◆ Lightweight design, 1200W, 1U-sized 2-channel power amplifier with built-in DSP
◆ IDEEA (IntelliDrive Energy Efficient Amplifier) ​​technology reduces power consumption of the main power supply
◆ 2 x 500W (2Ω) / 2 x 600W (4Ω) / 2 x 300W (8Ω)
◆ Network control via touchscreen user interface
◆ 8 filter types including parametric EQ can be selected
◆ Advanced DSP with 10 bands for each input and output of each channel, totaling 40 bands
◆ 10 types of crossover filters
◆ Input delay and output delay are both up to 2000ms
◆ 4-channel input mixer with multi-input mixing and switching
◆ System configuration and setup with 100 user presets
◆ AES3 and analog inputs with redundant failover
◆ Proven Speaker Protect Limiter (maxSPL) for optimal speaker matching and protection
◆ Backlit display with navigation buttons and encoder
◆ Front panel setup
◆ Horizontal output VU meter displayed on display
◆ Automatic amplifier detection and identification for fast network setup

[General]
◆ Number of output channels: 2
◆ Maximum output power: 500 W (2 Ω) / 600 W (4 Ω) / 300 W (8 Ω)

[Controls]
◆ Front: Power switch, DSP section rotary push encoder
Menu, back, mute buttons (per channel)

[System]
◆ Output voltage: 70 V peak / 50 V rms / 36.2 dBu
◆ Input sensitivity of maximum output voltage: 6 dBu
◆ Output current: 16 A rms
◆ Output circuit: Class D
◆ Distortion rate (20 Hz ? 20 kHz @ 1 W): < 0.1%
◆ Distortion (1 kHz, 1 dB below clip): < 0.05%
◆ Output noise (A-weighted): -66 dBu
◆ Signal to noise ratio: > 102 dB
◆ Channel crosstalk: > 80dB @ 1 kHz
◆ Frequency response: 10 Hz to 20 kHz, +0.5/-1 dB / 5 Hz to 40 kHz, -3 dB
◆ Common mode rejection ratio (CMR): > 50 dB
◆ Gain (all DSP control settings = 0 dB): 30 dB

[Indicators]
◆ Power: Red
◆ Limit per channel: Red
◆ Signal/mute per channel: Signal (green), Mute (red)

[Digital Signal Processing (DSP)]
◆ Display: LCD 128 x 32 with white backlight
◆ Functions: 40 multi-slope parametric equalizers
Adjustable high-pass and low-pass filters
Input and output delay (up to 2 seconds each)
Crossovers with multiple filter types
◆ Presets: 100 presets

【Connectors】
◆ Analog inputs: 2 x XLR
◆ Analog input impedance: 18 kΩ unbalanced / 36 kΩ balanced
◆ Maximum analog input level: 20 dBu
◆ Digital inputs: 1 x XLR (AES3 digital format)
◆ Link outputs (analog): 2 x XLR
◆ Link outputs (digital): 1 x XLR (AES3 digital format)
◆ Speaker outputs: 2 x locking Speakon connectors, 2 x binding posts
◆ Network control: 1 x RJ-45

【Protection】
◆ Cooling: Continuously variable speed fan, front intake / rear exhaust
◆ Amplifier protection: (thermal, DC, overcurrent) protection
◆ Circuit protection: Controls start-up and shutdown operation, DC fault protection

[Power supply, voltage]
◆ Nominal voltage: 100 VAC, 50 / 60 Hz
◆ Power consumption (rated power 1/8 @ 4Ω): 250 W
◆ Standby power consumption: < 7 W
◆ Connector: Standard IEC connector

[Dimensions/weight]
◆ Dimensions (H x W x D): 44 x 483 x 336 mm
◆ Weight: 5.3 kg