SONIC / 3-Pointed Drill PD-30

Commercially available metal drills cannot accurately drill holes in wood. This cutting tool, which is called a "three-eyed drill" in the industry, is a drill that can accurately drill holes in the determined position because the tip in the center is positioned accurately and the tip on both sides cuts the wood fibers firmly.

■ Specifications
・Drill for woodworking
・For guitar production and repair
・3.0φ: Bridge (synchronized tremolo) set screw (3.5mm)
The locations and screw sizes above are only a guideline, and should be used flexibly according to the hardness of the wood, the length of the screws used, etc.

★How to use★

(1) Attach it to the drill chuck and rotate it a little to make sure that the tip is not shaken.
(2) Especially when using a drilling machine, it hits the workpiece while it is rotating.
③If you use a handheld electric drill, place the tip of the drill vertically on the position you want to drill and then rotate it.

●Do not use on materials other than wood and resin.
●It has a very sharp tip. Careless handling may result in injury, so be careful.
●Keep out of reach of children.
●Since it is made of iron and is prone to rust, please do not store it in a place with high humidity.