Fostex / AP25 Power Amplifier

The top model ""AP25"" equipped with a digital amplifier with a maximum output of 25W x 25W has been released in the Fostex personal amplifier ""AP series""! The high-quality sound design that uses dedicated audio parts in various places has achieved clear and high-quality sound. Recommended for those who want to enjoy everyday listening and movies/videos in a higher-class environment.

■Power Amplifier
■25Wx2 (4Ω), 17Wx2 (8Ω)

This is a compact-sized personal amplifier equipped with a 25W+25W digital amplifier. The high-quality design uses dedicated audio parts to improve sound quality in various places, achieving clear, high-quality sound worthy of the top model of the ""AP Series"".

■Main Features
- High-performance digital amplifier with a maximum output of 25W + 25W, op amps, and other carefully selected high-quality audio parts are used in various places to achieve clear, high-quality sound.
- Equipped with a pre-out output terminal, you can expand your system by connecting an active subwoofer or power amplifier.
- The output terminal of the passive speaker uses gold-plated terminals compatible with banana plugs.
- Adopts a compact size (width 133mm, height 42mm, depth 165mm) housing that matches various scenes.
- Equipped with an auto standby function that complies with the European Ecodesign Directive. If the input to this unit continues to be no signal or at a signal level close to that, it will automatically switch to standby mode and reduce power consumption to 0.5W or less. In addition, this function can be turned on/off using the dip switch on the bottom, and the time until the unit goes into standby mode can be set to either 1 minute or 12 minutes, depending on the usage environment and purpose.

■Main specifications
Maximum output: 25 W + 25 W (4 Ω load), 17 W + 17 W (8 Ω load)
Compatible load impedance: 4 Ω to 8 Ω
Frequency response: 20 Hz to 20 kHz
Total harmonic distortion: 0.01% or less (output 3 W, 8 Ω load, 1 kHz)
S/N ratio: 100 dB or more
Input terminal: RCA (1 system) / Input sensitivity: 300 mV
Output terminal (PRE OUT): RCA (1 system)
Power supply: DC20V (dedicated AC adapter included)
Power consumption: 68 W (maximum), 0.5 W or less (standby)
External dimensions: 133 mm (W) x 42 mm (H) x 165 mm (D) *including maximum protrusions
Unit weight: 750 g
Accessories: AC adapter x 1, speaker cable (1.5 m) x 2, stereo RCA cable (1.5 m) x 1