SONY / ECM-MS2

SONY: A cost-effective stereo microphone

■Compact design suitable for mounting on small camcorders
The 137mm overall length is just the right size to reduce reflections on the camcorder lens.

■Directivity that maintains a strong stereo effect
The MS stereo method reliably captures the surrounding sound field.
(Supply DC40-52V to the L/R channels.)

■Mono operation also possible
When the R channel cable is not connected, the device will be in mono mode.
Tie the removed R terminal with the included cable clip.
(Supply DC40-52V to the L channel.)

■Easy to use with integrated connection cable
The connection cable and balanced connector are integrated into the microphone body.

~Product Specifications~
■Condenser microphone
■Stereo type: MS stereo type
■Frequency response:
Stereo: 80-20,000Hz
Mono: 70-20,000Hz
■Directivity: Unidirectional
■Output impedance: 30Ω±20% balanced type
Front sensitivity:
Stereo: -32dB (0dB=1V/Pa, 1kHz)
Mono: -36dB (0dB=1V/Pa, 1kHz)
■Signal-to-noise ratio: 69dB or more (IEC 179 A-weighted, 1kHz, 1Pa)
■Inherent noise: 25dB SPL or less (0dB SPL=2×10Pa)
■Wind noise
With windscreen: 45dB SPL or less
Without windscreen: 65dB SPL
■Maximum input sound pressure level: 125dB SPL or higher (equivalent input sound pressure equivalent to the input level at which the microphone output signal produces 1% waveform distortion at 1 kHz)

■Dynamic range: 100 dB or higher

■Power supply: External supply, DC40-52 V (IEC61938 P48)

■Power consumption
Stereo: 3 mA or less x 2 channels
Monaural: 3 mA or less

■Output terminals: XLR-3-12C x 2

■Permitted operating temperature: -20-+60°C

■External dimensions (diameter x length): Approx. φ24 x 137 mm

■Weight: 160 g

■Accessories: Windscreen (1), cable clip (1), instruction manual (1), warranty card (1)