TOA / WTU-D2810

Variations

In Stock

WTUD2810

This is a plug-in type tuner unit for embedded devices exclusively for 800MHz digital wireless microphones using a crystal-controlled PLL synthesizer system. By operating the setting switch on the front of the tuner unit, you can set the frequency from 30 waves and the code from 10 patterns.

Wireless tuner unit, compatible with WA-2800 series ・Power supply: DC6-10V (supplied from the main unit) ・Current consumption: 120mA or less ・Local oscillation method: Crystal-controlled PLL synthesizer method ・Reception frequency: 806.125-809.750 MHz (1 of 30 waves) ・Reception method: Superheterodyne method ・Diversity method: Digital true diversity method ・Antenna input impedance: 50 Ω ・Reception sensitivity: 24dBμV or less (bit error rate 1E-5 or less) ・Signal-to-noise ratio: 92dB or more (using A-curve) (*1) ・Output: 0dB (*2) (0dBFS input, load 4.7kΩ or more) ・Distortion rate: 0.5% or less ・Code settings: 10 pattern switching ・Operating temperature range: -10 ℃ to +50 ℃ ・Operating humidity range: 30% to 85% RH (no condensation) ・Finish: Surface-treated steel plate ・Dimensions: 60 (W) x 25 (H) x 138.6 (D) mm ・Weight: 180g ・Accessories: Setting driver... 1, Color mark (10 colors)... 1 ・Compatible models: Wireless amplifier: WA-2800, WA-2800CD, WA-2800SC, 　　　　　　Wall-mounted amplifier: VA-62, VA-122 　　　　　　Mobile PA amplifier: KZ-25A, KZ-30A, KZ-65A, KZ-120CD, KZ-120SC, KZ-120SC-H 　　　　　　Mobile PA wireless powered speaker: KZ-100WS, 　　　　　　Outdoor amplifier: WA-120D (*1)Depends on the microphone used ※The frequency setting is BA1 (806.750 MHz), and the code setting is "0". *Cannot communicate with TRANTEC digital wireless systems (S-D7200-JB, S-D7300-JB, etc.). *Cannot communicate with analog wireless systems (WM-1220, WM-1320, etc.). *Cannot be used with analog wireless tuners (WT-1822, WT-1824, etc.) and digital wireless tuners (WT-D1802, WT-D1804).