Beetronics / FATBEE

An overdrive pedal with an attractive tube amp-like sound. The JFET-based drive circuit achieves amp-like saturation. It delicately expresses guitar volume and picking nuances. It can create a wide range of sounds from preamp-like crunch sounds to fuzz-like hard drive. It also works as a clean booster.

■Guitar Effects ■Blender Old Blood Noise Endeavors Signal Blender is a simple yet profound, original two-effect loop switcher that allows you to freely mix two parallel effect loops and clean sound, and switch between each output with a foot switch. The two effect loops and clean tone can each be controlled with a knob, allowing you to freely adjust the mix balance. In addition, each output can be turned on/off with the A, B, and CLEAN foot switches. Turning all outputs off will set it to true bypass. The A and B effect loops each have a Φ button, which allows you to invert the phase of the signal output from each SEND. Try pressing this button if the sound disappears or becomes too quiet when mixing. - 2 parallel effect loops + clean blend By mixing distortion and spatial effects in parallel, you can combine a clean spatial effect behind the distortion. For example, you can use it to play a HAUNT fuzz riff while applying a PAD reverb like Dark Star. You can also mix a clean tone into it.・3to1 Mixer By using the input and the A, B return terminals, it can also be used as a mixer that mixes three inputs. ・1to3 Splitter The input signal is branched into A, B, and CLEAN. By using the A, B SEND and OUTPUT terminals, one signal can be branched into three. ・Volume Control If you use only CLEAN and set the volume in advance, you can switch the volume with the foot switch. ・9V Out Equipped with a 9V output that supplies power to external effects. The output current capacity varies depending on the power supplied to the Signal Blender. The Signal Blender is powered by a standard center negative DC9V adapter. The unit consumes 31mA of current.