KLARK TEKNIK / DN100-V2

This classic active DI has been reborn with a new design from KLARK TEKNIK. This direct box combines high acoustic performance with the robustness to withstand the harsh conditions of use on stage.

■Active DI box with wide dynamic range The DN100 is an active DI that has been highly praised by engineers and musicians. Its high headroom, dynamic response and sonic clarity allow it to faithfully reproduce the characteristics of your instrument and capture every detail of your performance. The DN100 is intended for use with mixers with +48V phantom power, and its innovative design gives it a very high clipping point, providing a +10dBu output into a 2KΩ load. This increased headroom means it can handle much higher level input signals without the need for an attenuation pad. Combined with its low-noise input circuit topology, the DN100 offers an extremely wide dynamic range, allowing it to be connected directly to an equipment amplifier output or other very high level signal source with only a -20dB pad. The DN100 is designed to withstand the rigors of onstage use, with a thick extruded aluminium housing to protect the electronics and sturdy silicone rubber corners. ■Main Features ・2-channel active DI box with high headroom design and wide dynamic range due to +48V phantom power ・Fully transformer-isolated design ensures electrical isolation between PA and stage equipment ・Balanced line inputs on Neutrik Combo* XLR and high impedance 1/4" TRS connectors ・20dB input pad and earth lift switch ・Aluminum extruded case with rubber corner protection ・Compact and rugged design