CopperSound Pedals / BROADWAY52BUTTBK

Treble booster/germanium preamp inspired by the Rangemaster circuit. By combining bass cut and mid boost, it produces thick distortion without crushing the sound.

■Guitar effects ■Reverb with Expression & Effects Loop ■Controls: Reverb, Depth, Blend, Reverb II, Preamp ■Two ways to use the EXP terminal -Expression You can connect an expression pedal to control the amount of reverb. The setting value of the Reverb knob will be the maximum value when the expression pedal is pressed. * Use a TRS cable for connection. -Effects Loop You can connect an effects to the EXP terminal using a TRS-Y cable. Effects connected to the effects loop only affect the reverb component, not the original sound. *TIP=Send, Ring=Return ■Preamp control to push the sound Equipped with a discrete JFET preamp. Turning the knob up boosts the reverb component, strengthening the decay and reverb time effects. It also creates a slight distortion and a stronger sense of compression. If an external effect is connected to the EXP terminal, the volume of that effect will also be boosted. ■Reverb II switch You can switch between two reverb settings. You can set Reverb to short reverb and Reverb II to long reverb and switch instantly. ■Wide headroom with Burr Brown op amps Uses audio op amps made by Burr Brown. Supports a driving voltage of 9-18V. By running at 18V, you can get a clearer sound with wider headroom. ■True bypass ■Hand Made in USA ■Dimensions: W12 x D9.5 cm ■Power supply: 9V DC / 75mA / center negative