ADV. (ADVANCED) / MODEL 3 Wireless

Model 3 Wireless 2nd Gen is an ear monitor set that can be used both wired and wirelessly, bundling the high-resolution in-ear monitor Model 3 with the Bluetooth receiver Accessport Air.

■High-resolution compatible - Equipped with an 8mm dynamic driver developed in-house that enables wide-range playback from 20Hz to 40kHz. It faithfully reproduces the original sound over a wide range. *High-resolution playback is only available when connected via wired connection. ■Authentic universal in-ear monitor - Model 3 is a universal in-ear monitor designed for musicians and sound engineers. The compact, over-the-ear type housing is ergonomically designed to fit snugly around the ear and boasts high sound insulation performance. ■Supports both wired and wireless connections with MMCX connection - Model 3 uses an MMCX connection that is easy to attach and detach. For wired connection, use a regular MMCX cable (1.2m), and for wireless connection, re-cable with an MMCX short cable (38cm) to connect to the wireless Bluetooth receiver. ■Wireless Bluetooth receiver [Accessport Air] - Compatible with Bluetooth version 5.0 and supports high-quality audio codecs aptX, aptX-LL, and AAC. You can enjoy high-quality wireless sound on your iPhone or Android device. ■Compact, with large-capacity battery - The main unit has a slim body weighing just 12g, and can be clipped to a shirt breast pocket etc. for use. It can operate continuously for 9 hours, and can also be used while charging. ■Equipped with a remote controller with built-in microphone - In addition to music playback, you can also use the built-in microphone for phone calls, online chats, etc. ■Accessories ・1x Model 3 in-ear monitor ・1x ACCESSPORT Air Bluetooth receiver ・1x MMCX cable with remote control for wired connection, 3.5mm plug (1.2m) ・1x MMCX short cable for wireless connection, 3.5mm plug (38cm) ・3x pairs of silicone ear tips ・3x pairs of foam ear tips ・1x USB-C charging cable ・1x premium carry pouch ＜Specifications＞ ■Model 3 in-ear monitor ・Driver: 1x 8mm dynamic driver ・Impedance: 16 Ohm+/-15% ・Sensitivity: 100dB+/-3dB at 1kHz ・Frequency response: 20Hz - 40kHz ・Body weight: 2x 3g ■Bluetooth receiver (Accessport Air) ・Bluetooth version: 5.0 + aptX / aptX low-latency / AAC ・Battery life: up to 9 hours ・Communication range: approx. 10m ・Current consumption: Max 14mA (calls) / 18mA (media playback) ・Charging current: 80mW ・Charging port: USB-C ・Charging time: Approximately 2 hours ・Size: 23mm x 55mm x 8mm ・Body weight: 12g