Limetone Audio / JCB-2S Black

A signal junction box that emphasizes sound quality and supports two audio signals, input and output.

■ Junction box
■ Black

We have poured the know-how of other products such as volume pedals into our thorough sound quality design.

A dedicated board is placed inside to fix each jack, and the audio signal part and ground line are connected by hand wiring instead of the pattern wiring of the board. Wiring materials are selected in consideration of the tendency of sound due to the jack and housing. Regarding the solder used, we use two types of solder depending on the location, and devise ways to convey as little loss as possible from low to high frequencies.

The ground of each terminal is independent and suppresses the occurrence of a ground loop. The ground of the housing is connected to the ground of the output terminal.

The direction of the signal is indicated by the "▼" mark, so use it so that the signal flows in that direction.


・ By consolidating the input / output locations in one place, the time required for setup can be shortened.
-Avoiding extra troubles (other wiring comes off, knobs are moved) due to not having to touch the effector in the pedal board
-You can freely decide where to place the effectors in the pedal board (no need to consider placing effectors located at IN and OUT at the ends).

■ Specifications
-Connection terminal: input and output 2 ports each
・ Accessories: Instruction manual, warranty card
・ External dimensions: width (W) 92 mm, depth (D) 43 mm, height (H) 31 mm
・ Weight: 123g