PRESONUS / Revelator USB接続PC用マイク

Variations

マイクの指向性切替、ループバック、エフェクターなど、あらゆる機能を一台に詰め込んだオールインワンUSBマイク。手軽に高性能なUSBマイクを手に入れたい方にお勧めです。

- Product specifications -
Microphone
■ Directivity: Unidirectional, bidirectional, omnidirectional
■ Frequency characteristics (± 3.0dB: 20Hz to 20kHz
■ Sensitivity: 1mV / Pa
■ Maximum SPL: 110dB <3% THD
■ Headphone output type: 1/8" TRS active stereo
■ Output (RMS): 22.6mW (16Ω)
■ THD: 0.008%

Headphone output
■ Frequency characteristics: 20Hz-20kHz
■ Impedance: 16Ω
■ Dynamic range: 77.5dB

Audio interface
■ Type USB-C Compatible USB 2.0
■ Sample rates 44.1, 48, 88.2, 96 kHz (Note: Multimode on macOS is only 44.1 and 48 kHz)
■ Bit depth 24-bit
■ Power supply USB bus power drive
■ Hardware control Direct monitor, microphone volume, headphone volume, mute, preset selection
■ Software control Microphone volume, pattern selection, monitor mix, preset management / editing
■ On-board DSP
PreSonus Fat Channel: High-pass filter, noise gate, 3 types of compressor models (standard, vacuum tube, FET), 3 types of EQ models (standard, passive, vintage), limiter
Mixer: Reverb
Voice effects: doubler, detuner, vocoder, ring modulator, filter, delay

■ Size: 225 x 130 x 130mm (height x width x depth)
■ Mass 0.73kg

System requirements:
Revelator required environment

Windows
Windows 10 (64-bit only)
Intel i3 / AMD A10 processor and above
4GB or more RAM (8GB or more recommended)
Mac
macOS 10.13 or later (64-bit only)
Intel I3 and above
4GB or more RAM (8GB or more recommended)
Common to Windows and Mac
USB-C Or USB-A 2.0 port compatible
32GB hard disk capacity
PreSonus Universal Control Software 3.4 or later (Japanese UI requires 3.5 or later)
Monitor with resolution 1,366x768 (high dpi monitor recommended)
Multi-touch compatible monitor (required for touch operation function)
Minimum system requirements may vary if you are using a DAW other than Studio One. For details, refer to the instruction manual of your DAW.
The performance of the entire recording system is highly dependent on the computer's processor processing power, RAM capacity, and hard disk capacity / processing speed. Audio latency also depends on the processing power and RAM capacity of the system.