SSL (Solid State Logic) / 500 Series SiX Channel Channel Strip Modules

A 500-series format channel strip that follows the circuitry of the SiX console.

The SSL SiX Channel is a 500-series format channel strip that follows the SuperAnalogue channel of SSL's SiX console, including mic pre, low and high EQ, and single knob compressor.

■SuperAnalogue Pre-Amp input
The SuperAnalogue design boasts a wide gain range and ultra-low noise. Both line and mic gain switches are provided to cover a wide range of sources. The line input impedance is 10kΩ, but can be switched to 1MΩ using the Hi-Z switch, allowing you to connect high impedance sources such as guitars without the need for an external DI box.

■EQ
The EQ is a two-band design with gentle, broad strokes at 3.5 kHz and 60 Hz, and an adjustable gain range of +15 dB to -15 dB. Each band can be individually switched between shelving curve and bell curve. The bell curve operates at 5 kHz and 200 Hz with a changeable center frequency, increasing the versatility of the two controls.

■Compressor
A simple, versatile one-knob channel compressor is included for powerful and versatile performance. It also features three LED meters to indicate the amount of gain reduction. The circuit features auto make up gain to maintain the signal level over the full range set by Threshold.

■Key Features:
SuperAnalogue Mic Pre with 48V, Polarity and HPF
Front Panel TRS Line Input with 1MΩ Hi-Z switch.
Switched 2 band EQ with indepandantly.
Switched single knob compressor with variable threshold.
5 frequency selectable High-Pass Filter and Dedicated Output Trim.

■Other Features
Switched 12 dB/oct, 75 Hz High Pass Filter (HPF)
Polarity Switch (?) A five segment LED meter shows the polarity of the rear XLR Mic Amp rack input.
A five segment LED meter shows the output signal level in dBu.

■Tech Specs:
Module signal: Mono
Pre-Amp Gain: Variable from +6 to +72 dB (Mic), -3 to +63 dB (Line)
Mic Pre EIN: Typically 129dB
THD+N: <0.0015%.
CMRR: >80dB (Mic), >70dB (Line)