This SDI to HDMI converter has a variety of conversion functions, including resolution up/down, frame rate, aspect ratio, etc. It can also split one SDI signal into two signals, making it a useful model for a variety of locations.
■Frame rate conversion compatible SDI to HDMI converter ■SDI input formats supported: SD-SDI: 720x480i59.94, 720x576i50, HD-SDI: 1280x720p59.94/p60/p50, 1920x1080i59.94/i60/i50, 1920x1080p23.98/p24/p25/p29.97/p30, 3G-SDI Level A: 1920x1080p59.94/p60/p50 3G-SDI Level B-DL: 1920x1080p59.94/p60/p5 3G-SDI Level B-DS: 1280x720p59.94/p60/p50 1920x1080i59.94/i60/i50, 1920x1080p23.98/p24/p25/p29.97/p30, *Stream selection for 3G-SDI Level B-DS is set in BoxCenter. ■HDMI output supported formats; SD: 720x480i59.94, 720x576i50, 720x480p59.94/p60, 720x576p50, HD: 1280x720p59.94/p60/p50,
1920x1080i59.94/i60/i50,
1920x1080p23.98/p24/p25/p29.97/p30,
3G: 1920x1080p59.94/p60/p50
1680x1050p60, 1600x1200p60, 1440x1050p60,
1440x900p60,1400x1050p60,1366x768p60,
1280x1024p60, 1280x960p60,1280x800p60, 1280x720p60, 1024x768p60, 800x600p60, 640x480p60 ■HDMI output supported formats: SD: 720x480i59.94, 720x576i50, 720x480p59.94/p60, 720x576p50, HD: 1280x720p59.94/p60/p50, 1920x1080i59.94/i60/i50, 1920x1080p23.98/p24/p25/p29.97/p30, 3G: 1920x1080p59.94/p60/p50 1680x1050p60, 1600x1200p60, 1440x1050p60, 1440x900p60,1400x1050p60,1366x768p60, 1280x1024p60, 1280x960p60,1280x800p60, 1280x720p60, 1024x768p60, 800x600p60, 640x480p60 ■Pass Through mode supported formats: SD: 720x480i59.94, 720x576i50, HD: 1280x720p59.94/p60/p50, 1920x1080i59.94/i60/i50, 1920x1080p23.98/p24/p25/p29.97/p30, 3G Level A: 1920x1080p59.94/p60/p50 3G Level B-DL: 1920x1080p59.94/p60/p50 * Scaler is bypassed in Pass Through mode * OSD display is not supported * Maximum delay is 2 lines * PassThrough is not supported for 3G-SDI Level B-DS ■SDI Input: 3G-SDI Level A Direct image format mapping (SMPTE 425M) 3G-SDI Level B-DL SMPTE ST372 Dual Link mapping, (SMPTE 425M) 3G-SDI Level B-DS 2xSMPTE ST292-1(HD-SDI) dual-stream mapping (SMPTE 425M) HD-SDI (SMPTE 292M) SD-SDI (SMPTE 259M) ■SDI through output: Active through (equalizer/reclock always enabled) ■HDMI output: HDMI Ver.1.3a, not compatible with HDCP, not compatible with CEC, not compatible with DeepColor, color space RGB/YCbCr444/YCbCr422 switchable ■Audio input: SDI embedded audio (LPCM Max.8ch,48kHz) ■Input/output delay: Scaler mode: Max. 2 frames. Pass Through mode: Maximum 2 lines ■Recommended SDI cables ・RG6 (equivalent to 5CFB) 75Ω 3G: Maximum 100m / HD: Maximum 170m / SD: Maximum 400m ・RG59 (equivalent to 3C2V) 75Ω 3G: Maximum 86m / HD: Maximum 120m / SD: Maximum 280m *Measured with RG6: CANARE L-5CFB, RG59: Belden 9275 *Maximum cable length varies greatly depending on the equipment used and the performance and quality of the cable. ■Input terminal: SDI (75Ω BNC) x 1 ■Output terminal: HDMI Type A x 1 system SDI LOOP THRU (active through output) (75Ω BNC) x 2 ■USB connector: USB Micro-B x 1 ■DIP switch: 8bit (Control / Audio Mute / Video Format / Frame rate) ■Case: SECC
商品レビューProduct Review
すべてのレビューを見る