Fostex / RM-3DT

The RM-3DT is a rack-mount monitor with a built-in 10W x 2 power amplifier. It enables the transmission of multiple uncompressed digital audio signals and features Dante? audio networking capabilities.

■ Rack-Mount Powered Monitor Speaker

The RM-3DT is a rack-mount monitor with a built-in 10W x 2 power amplifier and Dante audio network functionality developed by Audinate, enabling the transmission of multiple uncompressed digital audio signals.

■ Features

● Supports balanced analog input and Dante? input.

● Power-saving design using a digital amplifier and switching power supply.

● 26-dot LED meter display offers four selectable modes: VU, VU+PEAK,

VU+PEAK hold, and PEAK+PEAK hold.

● Display brightness is adjustable in four levels.

● Can output either or both of two arbitrary digital signals extracted from the Dante? network signal.


■Specifications

■Main Specifications

・Speaker

Built-in Unit: 110 × 40 mm Cone-type, Magnetically Shielded

Impedance: 8Ω

Output Sound Pressure Level: 84 dB/W (1 m)

Frequency Response: 200 Hz ? 20 kHz

・Power Amplifier

Maximum Output: 10 W × 2

Residual Noise: -50 dBV or less (DIN AUDIO)

Distortion Rate: 0.1% or less

Dante Input

Connector: RJ45

Format: Dante

Analog Input

Connector: XLR-3-31 Type

Rated Input Level: Balanced: +4/0 dBu

Input Impedance: 10 kΩ or higher

Analog THRU Output

Connector: XLR-3-32 Type

PHONES

Connector: Φ 6.3 mm Stereo Phone

Suitable Load Impedance: Impedance 16 Ω or higher

Maximum output: 20 mW + 20 mW (32 Ω, 1 kHz)

Level meter

Display: 26-dot LED × 2

Reference level: Analog XLR: +4/0 dBu

General

Dimensions (mm): 482 (W) × 44 (H) × 284 (D) (including protrusions)

Weight: Approx. 3.5 kg

Power supply: AC 100 V ~ 240 V 50/60 Hz

Power consumption: 10 W