BOSE / PowerShare PS604D Adaptable Power Amplifier

The PowerShare PS604D Adaptable Power Amplifier is a 600W total power amplifier that supports low impedance and high impedance transmission of 100V lines.

■Power Amplifier ■High/Low Impedance Support ■600W @ 4-8 Ω, 70/100V ■1U ■Dante Enabled Get power where you need it. Unique technology inherited from the proven PowerMatch series delivers superior audio performance, reliability and flexibility. Innovative PowerShare technology shares amplifier power across all output channels, providing 600W of power, ideal for permanent installations. The total 600W of power can be split as needed between each output, or the full power can be concentrated into a single output. Supports both low impedance and high impedance transmission up to 100V, making it easy to use in a variety of applications. Ethernet-based configuration is possible with ControlSpace Designer software. Quickly set up external control options. The built-in DanteR audio network gives you the flexibility to place PowerShare amplifiers further away from the source or closer to the speakers. With an unmatched combination of features and technology, PowerShare is one of the most versatile and high-performance power amplifiers available today. Features ■PowerShare Technology Our unique PowerShare technology allows you to freely distribute the total power of 600W to all outputs. Full power is achieved at each output. Rather than determining the amplifier output based on the zone that needs the most power, you can freely use the total power wherever you need it. In addition, since the surplus power can be effectively utilized, it is flexible to respond not only to the acoustic design at the time of installation, but also to unexpected changes after installation. ■Flexible impedance settings Channels can be set to low impedance (4 to 8 Ω) or high impedance (70/100V) without the need for bridge connections or jumpers. ■Built-in Dante Audio Network Supports Dante network audio input channels (4ch). Mixes digital Dante inputs selected in ControlSpace Designer software with the built-in analog inputs. ■Dual feedback loop system Improved performance and reliability. Inherits the dual feedback loop system of the proven PowerMatch amplifier series. Supports continuous monitoring and control of both the current and voltage sent to each output. Improves linearity, reduces distortion, and protects speakers at the same time. ■ControlSpace Networking Connect to larger networked audio systems using configurations in ControlSpace Designer software. Control amplifier parameters with end user controllers and scheduled events. ■Integrated Loudspeaker Processing Use ControlSpace Designer software to adjust a wide range of parameters including 9-band PEQ, matrix mixing, crossover, limiter, delay, mute/output polarity and more. ■Auto Standby Save power consumption – PowerShare amplifiers can be configured to automatically go into standby mode when the audio signal falls below a threshold and automatically wake up when an audio signal is detected again.