GRACE DESIGN / FELiX 2 (Silver)

This is a preamp/EQ/blender system dedicated to acoustic instruments, with two independent audio paths and blend control.

~From the manufacturer's website~ Studio recording quality 2ch instrument preamp & blender GRACE design's Felix is ​​a 2ch "instrument dedicated preamp/blender". Each channel has an EQ/filter section, and it is possible to mix and balanced output with piezo/magnetic pickups and condenser microphones for acoustic instruments. It fully utilizes GRACE design's "highly transparent and expressive" sound quality design, which is used by the world's top studios. It can reproduce the original sound and tone of live instruments with the same quality as professional commercial recording equipment. [Main features] ■ A preamp/EQ/blender system dedicated to acoustic instruments with sound quality and functionality that will satisfy all musicians and engineers. ■ Independent 2-channel audio path and blend control ■ Transimpedance microphone preamp design similar to the company's studio microphone preamps ■ Precision 0.5% metal film resistors used in all signal paths ■ Thorough power/ground design. ■ Quiet signal path on par with that used in professional recording equipment ■ High-quality, low distortion, fully shielded/isolated DI output ■ Heavy-duty metal bushing 1/4" jack terminals ■ Powerful EQ section per channel (Hi/Lo: shelving, Mid: fully parametric) ■ Mid EQ section with wide range of settings (two ranges: 70-880Hz / 6670-8kHz) ■ Variable high-pass filter from 20Hz to 1kHz (can be switched to notch filter mode to prevent feedback) ■ A/B footswitch. (By switching the mode) you can switch between two instruments or solo monitor different pickups ■ Mute/Tune footswitch (supports silent tuning) ■ Variable 10dB boost function (can be turned On/Off with a switch) ■ Flexible signal routing to DI outputs - Ch1 (mix or Ch1), Ch2 (mix or Ch2) ■ Amp output (with level control) to stage amp (blend or ■ Side panel controls (48V, Phase, Mid EQ range, HPF/Notch selection, 12V or A/B mode selection) ■ Supports 12V mic input power (ch2) ■ Phase inversion switch for each channel ■ 3 types of input impedance settings (per channel) - Ch1 10K, 1MEG, 10MEG / Ch2 332K, 1MEG, 20MEG (allows optimal settings for a wide range of pickup types) ■ Supports external footswitches (remote control from the foot when Felix is ​​set in a rack system or amplifier) ​​■ Flange mounting screws for microphone stands (Felix can be fixed to a microphone stand, compatible flange adapter (sold separately) required) ■ 1/8" headphone jack (monitoring possible even when Felix is ​​muted) ■ Insert jack (TRS) for external effects ■ Supports standard and universal AC power (not an AC adapter) ■ Professional-level durability designed for rugged tours, reliable quality for years of trouble-free use ■ Designed and made by family and friends in Lyons, CO, USA