Old Blood Noise Endeavors / Signal Blender

Old Blood Noise Endeavors ( オールドブラッドノイズエンデヴァーズ ) のブレンダー。入力された音源を並列でのルーティングを混ぜて出力することが可能になります。

■ Effector for guitar
■ Blender

Old Blood Noise Endeavors Signal Blender is a simple yet profound, original two-effects loop switcher that allows you to freely mix two parallel effect loops and clean sounds and switch their outputs with a footswitch.

The volume of each of the two effect loops and clean tones can be controlled with knobs, allowing you to freely adjust the mix balance.

In addition, each output can be turned ON / OFF with each foot switch of A, B, and CLEAN.

If all outputs are turned off, true bypass will occur.

Each of the A and B effect loops has a Φ button, which allows you to invert the phase of the signal output from each SEND. If the sound disappears or becomes quieter when mixing, try pressing this button.

・ 2 parallel effect loop + clean blend

By mixing the distortion system and the spatial system in parallel, you can combine a clean spatial system behind the distortion. For example, you can use it like carving a HAUNT fuzz riff while applying PAD reverb like Dark Star.

You can even mix clean tones there.

・ 3to1 mixer

If you use the input and the Return terminals of A and B, you can also use it as a mixer that mixes the three inputs.

・ 1to3 splitter

The input signal branches as A, B, CLEAN. You can use the A and B SEND and OUTPUT jacks to split one signal into three.

・ Volume control

If you use only CLEAN and set the volume in advance, you can switch the volume with the foot switch.

・ 9V Out

The 9V output which supplies power to an external effector is carried. The current capacity that can be output varies depending on the power supply supplied to Signal Blender.

Signal Blender is powered by a standard center minus DC 9V adapter. The current consumption of the main body is 31mA.