IK MULTIMEDIA / iLoud MTM White

Monitor speaker, 3.5" x 2, HF30W/LF70W, 1 pc, white

○ Main specifications of iLoud MTM
・Speaker type: 2 way/2 speaker, bi-amp specification digital control studio monitor
・LF driver: 2 x 3.5 inch, custom made mid woofer made of polypropylene
・HF driver: 1 inch, low distortion, back chamber specification silk dome tweeter
・Low-frequency reflection correction by DSP
・Number of built-in amplifiers per speaker: 2
・Amplifier type: High efficiency class D
・Total output: 100W RMS
・LF output: 70W RMS
・HF output: 30W RMS
・Crossover type: Linear phase, variable order
・Crossover frequency: 3.1kHz
・Frequency characteristics: 50Hz to 24kHz ±2dB (@40Hz -6dB non-calibration / -3 dB calibration)
・Phase characteristic: ±15° (200Hz to 20kHz)
・Sensitivity (+4dBu): 100dB SPL with 0dBu signal at 1m distance
・Sensitivity (+10dBV): 100dB SPL with -11dBu signal at 1m distance
・Maximum SPL @1m (play one speaker in front): 103dB (sine wave of 200Hz or more),
95dB (100Hz sine wave), 93dB (pink noise)
・Adjustment switch: LF Extension, LF trim, HF trim, Desk position
LF Extension Switch: Set -3dB frequency point from 40/50/60Hz
LF switch: From +2dB/flat/-3dB, set the trim of the low shelf below 100Hz
HF switch: +2dB/flat/-2dB to set high shelf trim above 8kHz
Desk switch: -4dB @160Hz, +1dB @1.8kHz
・Calibration: Built-in fully automatic digital calibration (measurement Microphone included)
・Measuring (ARC) microphone: Omni-directional, MEMS-specific detailed measuring microphone
・Full control by DSP
・Connection terminals: Balanced combo input (XLR/TRS standard phone), TS minif for ARC microphone
Phone input, USB type-B (for service), AC power inlet
・Power supply: 90V to 240V AC, auto range, 50/60Hz, power consumption 120W (maximum)
・Dimensions: 264 mm × 160 mm × 130 mm (per one)
・Weight: 2.5 kg
・Accessories: Power cable, ARC microphone, ARC microphone cable, corner
Adjustable stand (0 to 20 degrees), horizontal rubber feet, lock key

■ White

[Caution] This product is sold in single units, not as a pair.