Power Amps
HIGH IMPEDANCE POWER AMP
Stationary power amplifiers
TOA/VM-2120E VM-2000 series dedicated expansion amplifier 120W

TOA / VM-2120E VM-2000 series dedicated expansion amplifier 120W

The VM-2120E is an expansion amplifier exclusively for the VM-2000 series. It connects to the main amplifier with two cables: a link cable and an audio signal cable.

こちらの
商品も
オススメ！

CLASSIC PRO ハイインピーダンスパワーアンプ CMP-120

モノラル、120W、2U、20kg

This is a 120W expansion amplifier exclusively for the VM-2000 series system management amplifier. The main amplifier is connected with two cables, a link cable and an audio signal cable.

■Power supply
　AC100 V 50/60 Hz or
　DC24 V 7.5 A M3.5 screw terminal, barrier spacing 8 mm
■Rated output
　120 W
■Power consumption/current
　AC operation: 290 W (at rated output), 37 W (no core ligature), 140 W (according to the Electrical Appliance and Material Safety Act)
　DC operation: 7.5 A (at rated output), 0.7 A (no core ligature), 3.0 A (according to the Electrical Appliance and Material Safety Act)
■Frequency response
　50 Hz to 16 kHz
■Distortion rate
　1% or less
■S/N ratio
　60 dB
■Line selection key
5 stations + all at once (individual broadcasting possible)
■Reset switch
Removing abnormal conditions
■Remote microphone/external amplifier connection
Compatible models: RM-200MJ, VM-2120, VM-2240
Connection terminal: RJ45 x 2
Total length: Maximum 800 m
Connection line: CPEV line or Category 5 twisted pair cable for LAN (CAT5-STP recommended)
■Input
Power amplifier input: 0 dB (*1) 10 kΩ Non-parallel RCA pin jack
■Output
Speaker output: 83 Ω (high impedance 100 series) Removable terminal block (16P)
(With 5-round volume control, maximum 120 W per line)
■Control input/output
D-sub connector (25P)
No-voltage make contact input Open voltage: DC3.3 V, short circuit current: 1 mA or less
Open collector output Withstand voltage: DC30 V, allowable current: 10 mA or less
External control input: Power supply
Status output: Communication error between remote microphone and additional amplifier, AC power supply status, DC power supply status, power switch
■Operating temperature range
0℃ to +40℃
■Operating humidity range
80% RH or less (no condensation)
■Finish
Front panel: ABS resin, black (approximate Munsell N1.0 color), painted
Case: Surface-treated steel plate, black (approximate Munsell N1.0 color), painted
■Dimensions
419 (W) x 143.3 (H) x 355.7 (D) mm
■Weight
13 kg
■Accessories
Power cord (2 m)...1, Spare fuse (6.3 A)...1, Volume cover...5, CAT5-STP cable (3 m)...1, RCA pin plug cable (3 m)…1
■Optional items
Rack mount bracket: MB-35B
Guide rail: YA-706