Genuine SONEX sound absorbing adhesive. Used with caulking gun. Polyurethane adhesive.
■Capacity: 300g (10.6oz)
■How to use
1. Cut the adhesive cartridge nozzle to the joint width.
2. Pierce a hole through the moisture-proof film inside the nozzle.
3. Pull back on the adhesive gun handle.
4. Load the adhesive cartridge from the bottom.
5. Pull the trigger to release the adhesive.
・A dedicated gun is required for use.
・When applied to four sides, the number of adhesives per side will be about 10 if it is 60 cm square sound absorbing material. According to the manufacturer, one tube of adhesive should be used for bonding a 1.2 m x 1.2 m panel.
レビューを投稿するWrite a Review