SONY / WI1000XM2 SC

Variations

SONY/ WI-1000XM2BM is a wireless earphone that boasts the industry's best noise cancellation performance. You can enjoy high quality music playback without being affected by surrounding noise.

■High-quality noise canceling processor QN1 installed
・High-quality noise canceling processor QN1 is installed in a neckband style. By enabling high-performance noise canceling processing, you can enjoy high-quality sound playback without worrying about noise even in noisy environments.

■""Dual noise sensor technology"" for high-precision noise removal
・Noise collected by two sensors placed on the outside and inside of the headphones and the music signal of the player are all digitized. The DNC (digital noise canceling) software engine integrates two methods, feedforward and feedback, to generate anti-phase sound with high precision that has the effect of canceling noise. Clearer music playback is possible in a quieter environment.

■Noise canceling performance is optimized according to changes in air pressure
・Noise canceling performance is optimized according to changes in air pressure. Even when used on an airplane, high-quality noise canceling performance is achieved without being affected by air pressure.

■ Equipped with an ambient sound capture function that allows you to enjoy music while taking in surrounding sounds
- Equipped with an ""ambient sound mode"" that allows you to hear surrounding sounds while listening to music.

■ Supports LDAC, which allows you to enjoy high-resolution sound quality even wirelessly
- By connecting to an LDAC-compatible device, high-resolution content can be transmitted with up to approximately three times the amount of information of conventional Bluetooth Audio, so you can enjoy high-resolution content with sound quality that faithfully reproduces even the fine details of the original sound.

■ Upscaling to high-resolution class resolution with DSEE HX
- Even if you do not have a high-resolution sound source or a high-resolution compatible device, you can enjoy high-resolution sound quality equivalent to high resolution by supplementing the high-frequency range of compressed sound sources such as CD sound sources and MP3.

■High-quality sound is achieved by the DAC and amplifier built into the high-quality noise canceling processor QN1.

The high-quality noise canceling processor QN1 has a built-in D/A conversion circuit and headphone amplifier with the highest S/N ratio and low distortion characteristics for portable devices, and further improves sound quality by performing 32-bit audio signal processing.

■HD hybrid driver system that achieves rich wideband reproduction.

・Equipped with an HD hybrid driver system that combines a small, high-sensitivity 9mm dynamic driver unit and a balanced armature driver unit. Accurately reproduces everything from clear, deep bass to vivid, clear treble.

◇Headphones
■Type: Closed hybrid type
■Driver unit: Hybrid
■Sensitivity: 99 dB/mW (wired connection, POWER ON), 94 dB/mW (wired connection, POWER OFF)
■Magnet: Neodymium
■Frequency range: 3 Hz-40,000 Hz (JEITA)
■Impedance: 50 Ω (wired connection, POWER ON at 1 kHz), 17 Ω (wired connection, POWER OFF at 1 kHz)
■Cord length: Approximately 1 m
■Cord type: Single-sided (detachable)
■Input plug: Gold-plated L-shaped stereo mini plug
■Weight: Approximately 58 g (main unit: Approximately 44 g)
■Power supply: DC3.7V, built-in rechargeable lithium-ion battery
■Charging time: Approximately 3.5 hours, approximately 80% after 10 minutes of charging minutes can be used
■Charging method: USB
■Battery life (continuous audio playback time): Up to 10 hours (NC ON), Up to 12 hours (ambient sound mode), Up to 15 hours (NC OFF)
■Battery life (continuous talk time): Up to 9 hours (NC ON), Up to 10 hours (ambient sound mode), Up to 13 hours (NC OFF)
■Battery life (standby time): Up to 11 hours (NC ON), Up to 13 hours (ambient sound mode), Up to 100 hours (NC OFF)
■Frequency response: 3 Hz-40,000 Hz
■Compatible impedance: 50 Ω (wired connection, 1 kHz when POWER ON), 17 Ω (wired connection, 1 kHz when POWER OFF)
■Audio input terminal: Stereo mini jack

◇Microphone
■Type: MEMS
■Directional characteristics: Omnidirectional
■Effective frequency band: 50 Hz- 8,000 Hz

◇Bluetooth
■Communication method: Bluetooth standard Ver.5.0
■Output: Bluetooth standard Power Class 1
■Maximum communication distance: Line of sight distance approx. 10m
■Frequency band used: 2.4GHz band (2.4000GHz-2.4835GHz)
■Modulation method: FHSS
■Supported Bluetooth profiles: A2DP, AVRCP, HFP, HSP
■Supported codecs: SBC, AAC, LDAC
■Supported content protection: SCMS-T method
■Transmission band (A2DP): 20Hz - 20,000Hz (44.1kHz sampling) / 20Hz - 40,000Hz (LDAC 96kHz sampling, 990kbps)

◇Accessories
・USB Type-C(TM) cable (approx. 20cm), dedicated headphone cable (approx. 1m), carrying case, hybrid earpiece long SS, S, M, L (2 each), triple comfort earpiece S, M, L (2 each), airplane plug adapter