Xvive / XV-U4R

A single receiver for a 2.4GHz wireless in-ear monitor system. Use with the optional XV-U4 transmitter. 6-channel specification. Compact size makes it easy to carry.

XV-U4R 2.4GHz wireless in-ear monitor receiver
*An XV-U4 transmitter is required for use.
*When monitoring one type of sound, multiple receivers can be connected to one transmitter. (There is no limit on the number of connections.)
□Features
・Easy setup
・Lightweight and compact design
・Rugged metal body receiver
・Simple and stylish
・High functionality with high cost performance
・6 channel specifications
□Specifications
Frequency band used: 2.4GHz ISM worldwide (2400-2483.5MHz)
Frequency characteristics: 20Hz - 20KHz (-3dB)
Dynamic range: 107dB
Reception sensitivity: -88dBm
Total harmonic distortion: 0.2%
RF output power: 10mW E.I.R.P. max
Operating temperature: -18℃ to 57℃ *However, this may vary depending on the battery specifications.
Latency: Less than 5ms

Simultaneous usable channels: 6

Maximum transmission distance: Approximately 27m (Actual transmission distance varies depending on the environment such as radio wave reflection, interference, and absorption.)

Operating time: Approximately 5 hours (rechargeable lithium battery / charging time approximately 2.5 hours)

*Earphones are not included.

●U4 receiver

Size: 47x41x60mm, 118g

Material: Plastic molding, cast metal

Battery: 3.7V rechargeable Li-Ion, 1200mA

Impedance: 6-600Ω

Audio output connector: 3.5mm stereo out

Mode: Maximum output level 2.8Vp-p

Operating time: Approximately 5 hours (when fully charged)

Antenna impedance: 50Ω

Antenna type: 1/4 Wave Sleeve Dipole, Non-removable

Number of antennas: 2