AJA Video Systems / FS1

A powerful and flexible frame synchronizer and conversion from AJA Video Systems.

■Frame Synchronizer/Converter
■Supported formats:
(HD) 1080i 25, 29.97, 30
(HD) 1080PsF 23.98, 24
(HD) 720p 50, 59.94, 60
(SD) 625i 25
(SD) 525i 29.97
■Available output formats:
Input: 525i59.94→525i59.94, 720p59.94, 1080i59.94
Input: 720p59.94→525i59.94, 720p59.94, 1080i59.94
Input: 1080i59.94 5→25i59.94, 720p59.94, 1080i59.94
Input: 1080PsF23.98→1080PsF23.98, 1080i59.94, 525i59.94
Input: 625i50→625i50, 1080i50, 720p50
Input: 720p50→625i50, 1080i50, 720p50
Input: 1080i50→625i50, 1080i50, 720p50
Input: 1080PsF24→1080PsF24, 1080i60
Input: 1080i60→1080i60, 720p60
Input: 720p60 to 720p60, 1080i60
Note: If you input 1080psf 23.98 and select 1080i 59.94 (or 525) as the output format, FS1 will automatically perform a 3:2 pulldown to the correct frame rate.
Note: When passing 24 or 60 frame rate video, output is HD only.
■Digital Video Inputs:

2 x SD/HD-SDI, SMPTE-259/292/296, 8/10-bit

Single Link 4:2:2 (1 x BNC each)

■Analog Video Inputs:

・HD Component YPbPr, SMPTE-274 (3 x BNC)

12-bit A/D, 2x oversampling

・SD Component (3 x BNC)

SMPTE/EBU N10, Betacam 525 Line, Betacam 525J 12-bit A/D, 4x oversampling

+/- 0.25 dB ~ 5.5 MHz Y frequency response

+/- 0.25 dB ~ 2.5 MHz C frequency response

0.5% 2T pulse response

<2 ns Y/C delay inequity

・SD Composite/YC (S-Video)
12-bit A/D, 4x oversampling
■Digital video output:
・2x SD/HD-SDI, SMPTE-259/292/296, 8/10-bit
・Single Link 4:2:2 (1x BNC each)
■Analog video output:
・HD Component YPbPr/RGB, SMPTE-274 (3x BNC)
・12-bit D/A, 2x oversampling
・SD Component (3x BNC)
・SMPTE/EBU N10, Betacam 525 Line, Betacam 525J
・12-bit D/A, 4x oversampling
・+/- 0.25 dB ~ 5.5 MHz Y frequency response
・+/- 0.25 dB ~ 2.5 MHz C frequency response
・0.5% 2T pulse response
・<2 ns Y/C delay inequity
・SD Composite/YC (S-Video)
・12-bit D/A, 4x oversampling
■Digital Audio Input:
・16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, synchronous
・8-channel, 24-bit AES/EBU audio, 48KHz sample rate, synchronous or asynchronous, internal sample rate conversion (4 x BNC)
■Analog Audio Input:
・8-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (8 x XLR with 25-pin breakout cable)
*+12dBu, +15dBU, +18dBu, +24dBu (full scale digital)
*+/- 0.2db 20 ~ 20kHz frequency response
■Digital Audio Output:
・16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, synchronous

- 8 channel, 24-bit AES/EBU audio, 48KHz sample rate, synchronous or asynchronous, internal sample rate conversion (4 x BNC)
■ Analog audio output:

- 8 channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (8 x XLR with 25-pin breakout cable)
* +12dBu, +15dBU, +18dBu, +24dBu (full scale digital)
* +/- 0.2db 20 ~ 20kHz frequency response
■ Upconversion:

- Hardware 10-bit

- Anamorphic: Full screen

- Pillarbox 4:3: Centers a 4:3 image on the screen with black bars on both sides.

- Zoom 14:9: Zooms a 4:3 image slightly to create a 14:9 image with black bars on both sides.
・Zoom Letterbox: Enlarges the image until it fills the screen.
・Zoom Wide: Combines enlargement and horizontal stretching to make a 16:9 screen. This may slightly change the aspect ratio.
■Down conversion:
・Hardware 10-bit
・Anamorphic: Full screen
・Letterbox: Adds black bars above and below the image area and shrinks the image. The aspect ratio remains the same.
・Crop: Crops the image to fit the new screen size.
■Cross conversion:
・Hardware 10-bit
・1080i → 720p
・720p → 1080i
・720p → 1080PsF
■SD to SD aspect ratio conversion:
・Letterbox: Converts SD anamorphic material to a letterbox image.
・H Crop: Applies a horizontal stretching effect to the image. Converts anamorphic SD to full frame.
・SD Pillarbox: Generates an image in the center of the screen with black borders on both sides and an anamorphic image in the center of the screen.
・V Crop: Converts SD letterbox material to an anamorphic image.
■SIZE: 43.8(W)x4.4(H)x31.7(D) 2.94kg