BAE / 1073MPF SINGLE Microphone Preamplifier

This model of the 1073MP is equipped with a high-pass filter, and produces a fat, harmonically rich vintage sound that follows on from the Neve 1073.

*This package does not include a dedicated power supply.

■Microphone preamplifier high-pass filter version

The 1073MP is a microphone preamp version of the 1073 equalizer, well known for its characteristic Class A sound with a deep, rich low end, smooth highs, and thick mids. The Carnhill transformer input with two selectable impedances can be used with a variety of microphones, as well as a line input for coloring the 2 mixes and a DI input for all passive and active instruments. This microphone preamp is ideal for adding punch and character to your sound. The 1073MPF is equipped with a high-pass filter that can roll off mud, rumble, and other low frequencies.

■Main Features

- Class A, transformer-coupled design in a 1U chassis
- Equipped with an inductor-based high-pass filter
- 71dB GAIN supports low-output ribbon microphones
- Input impedance switchable from 1200-300Ω
- Supports line-level input
- High impedance DI for guitars, basses, etc.
- Equipped with polarity reversal switch
- Equipped with the same Carnhill St Ives transformer as the 1073 and 1084

■Specifications

Number of channels: 1
Frequency response: 10Hz-55kHz
High-pass filter: 50Hz, 80Hz, 160Hz, 300Hz
Equipped with phantom power
Analog input: 1 x XLR (mic), 1 x 1/4"" (Hi-Z)
Analog output: 1 x XLR
Power requirements: Dedicated power supply required separately
Dimensions: 19W x 1.75L x 9D (1U rack size)
Weight: 3.63 kg