AKG / K1500N40SET

10,000 yen off campaign for a set of 1 K1500 Headphone Up and 1 N40 Earphone

※10,000 yen discount campaign when purchasing the high-performance headphone amplifier AKG K1500 and AKG headphones and earphones at the same time!

■ Delicate expression by adopting pure class A operation
Low distortion pure class A operation achieves excellent signal characteristics with a total harmonic distortion rate of less than 0.002%. It outputs delicate and detailed sound. In particular, it matches perfectly with AKG headphones, which feature high resolution and clear sound. In addition, even though it is pure class A, it has sufficient output value, so it can powerfully drive any type of headphones.
■ Input terminals equipped with one analog RCA unbalanced and one XLR balanced system
The input terminal is equipped with an RCA terminal that is used by many players.
In addition, it is equipped with a balanced input (XLR terminal) that reduces noise, so you can enjoy high-quality sound even if you place the K1500 and the player in a distant location. The input can be easily switched with the switch on the back.

■Equipped with both φ3.5mm and φ6.3mm output terminals
The front panel is equipped with an output terminal of φ3.5mm, which is the mainstream headphone plug, and a φ6.3mm terminal that is often used in professional models. It is also possible to connect headphones to two systems and listen to them simultaneously.

■Compatible with headphones with a wide range of impedance from 16Ω to 600Ω
It provides ample driving power for high-impedance headphones developed as professional models, such as AKG professional headphones.

■Type: Pure Class A headphone amplifier
■Input: RCA x 1, XLR x 1 (switchable)
■Output: 3.5mm, φ6.3mm
■Recommended load impedance: 16Ω to 600Ω
■Frequency response: 10Hz to 20kHz
■S/N ratio: 96dB
■Total harmonic distortion: Less than 0.002%
■Rated output: 2.0W (16Ω), 1.1W (32Ω), 0.13W (300Ω)
■Power supply: AC100V 50/60Hz
■Dimensions (W x H x D): 194 x 44 x 135 mm (including volume knob)
■Weight (excluding cable): 1.15kg
■Accessories: Power adapter, RCA-RCA cable

＜N40 Features＞
■The top-of-the-line hybrid earphones equipped with Knowles' high-performance BA driver unit and a dynamic driver that reproduces powerful, wide-range bass.
■Proud of its accurate reproduction of the original sound, which is sufficient for sound engineers and professional musicians to monitor, and has a wide reproduction frequency range that also supports high-resolution sound sources.
■Uses three types of detachable mechanical filters. Optimize the sound to your preference from low to high tones.
■In addition to the stylish dedicated case, a flight adapter that can be used on airplanes is also included. It is also equipped with a remote control with a microphone that is compatible with smartphones, so you can easily perform operations such as hands-free calls, music playback and pausing at your fingertips.
■The cable is detachable and the connector part uses an mmcx terminal. It is compatible with commercially available earphone re-cables, etc., and you can easily replace and customize the cable.

■Earphones
■Type: In-ear type
■Driver: Hybrid type (1 balanced armature, 1 dynamic type)
■Impedance: 20Ω
■Sensitivity: 115dB
■Frequency response: 10-40,000Hz
■Weight: Approx. 20g
■Maximum input: 10mW