SE ELECTRONICS / SE7 PAIR

A set of two cardioid condenser microphones from SE Electronics. Ideal for capturing acoustic sounds, pianos, drums, and a variety of other instruments.

■Specifications

Type: 1/2 inch back electret condenser capsule

Directivity: Cardioid

Frequency response: 20Hz - 20kHz

Sensitivity: 19 mV/Pa (-34.5 dBV)

Maximum allowable sound pressure level (SPL): 136 / 156 dB SPL (0 / 20 dB pad)

Self-noise: 16 dB (A)

Dynamic range: 120 / 140 dB (0 / 20 dB pad)

S/N ratio: 78 dB

Low-cut filter: 80 Hz, 6 dB / Oct (switchable)

Pad: 20 dB (switchable)

Power supply: Phantom power 48V (IEC 61938 compliant)

Impedance: 200Ω or less

Recommended load impedance: 1kΩ or more

Current consumption: 3.0 mA
Connector: XLR 3-pin
Dimensions: 23 mm (diameter) x 120 mm (length)
Weight: 128 g
Accessories
sE7: Microphone clip (with conversion screw), windscreen
sE7 Pair: 2 microphone clips (with conversion screw), 2 windscreens

《From the manufacturer's site》
The sE7 is a high-quality back electret small diaphragm condenser microphone that is useful for a wide range of applications, from acoustic guitar to piano to drums, both in studio and live sound.

The optimized acoustic design, discrete class A circuit, and transformerless output section provide natural and clear sound quality at all frequencies without suffering from painful highs or lack of punch in the lows.

The discrete circuit and attenuation pad provide a wide dynamic range with high sound pressure level (SPL) compatibility and extremely low-noise components. The low-cut filter reduces rumble and unwanted noise from your feet, and also helps to compensate for excess low-frequency content caused by the proximity effect. This allows the sE7 to be used as a close-mic for many instruments, including electric guitar speaker cabinets, wind instruments, and drums.

The metal chassis, rugged construction, and high manufacturing standards designed to withstand heavy use ensure reliability even on demanding stages.