SONEX / PA-03 Sound-absorbing adhesive

Genuine SONEX adhesive for sound-absorbing materials. Use with a caulking gun.

■ Capacity: 297g (10.5oz)
■ How to Use
1. Cut the nozzle of the adhesive cartridge to fit the joint width.
2. Poke and break the moisture-proof membrane inside the nozzle with a stick or similar.
3. Pull the handle of the adhesive gun back.
4. Load the adhesive cartridge from the bottom.
5. Pull the trigger to fill.

- A dedicated gun is required for use.
- One cartridge will bond approximately 10 sheets of sound-absorbing material, for example, 60cm square. (This varies depending on the bonding method.)